- “Outsourcing Decisions in Single Machine Scheduling Problem with Multiple External Facilities", Journal of Marine Science and Technology, Vol. 24, No. 3.
- “Optimal Mobile Switching Center Positioning and Cells Assignment using Lagrangian Heuristic,” IEICE Trans. Fundamentals, Vol.E94-A, No.11.
- “Optimal Base Station Clustering for a Mobile Communication Network Design,”, KSII Transactions on Internet and Information Systems, Vol.5, No.5
- “Performance evaluation of a new QoS packet-scheduler for VoIP service in IEEE 802.16-based WMAN systems,”, Computer Communications, Vol.33, No.5.
- “QoS Packet-Scheduling Scheme for VoIP Services in IEEE 802.16e Systems,”, Journal of Communication Networks, Vol.11, No.1.
- American Information Technology (AIT), Inc., U.S.A., 연구원
, activity=, educationResearchCareer=
- KAIST, Visiting Scholar
- University of Washington, Tacoma, U.S.A., Visiting Scholar
- 경북대학교 전자공학과 조교
, academicCareer=
- 컴퓨터시스템응용기술사(과학기술부)
- ISO9001국제심사원
- 한국시뮬레이션학회 정회원, 임원
- 한국정보통신학회 정회원, 임원
- 한국정보처리학회 정회원, 논문지편집 A분과위원장
- 한국정보기술학회 정회원, 임원
, researchField=
- 임베디드 시스템
- CPS 및 Digital Twin
- 스마트팩토리
- IoT 및 네트워크
, lectureField=
1. 학부개설교과목
Capstone Design Ⅰ,Ⅱ
마이크로프로세서
통신시스템
VHDL
2. 대학원개설교과목
SDN/NFV
디지털트윈
, thesis=
- “System of Systems Approach to Formal Modeling of CPS for Simulation-based Analysis,” ETRI Journal, Feb. 2015
- “An ICT-based Solution for Alleviating Security and Inefficiency Problems in Unattended Autonomous Transportational Control to Ports,” Advanced Science Letters, Oct. 2017
- “A Methodological Approach to Cyber Home Services through Virtualization of Networked Residential Devices,” INFORMATION, May 2017
- “Autonomous and Operational Services for Machine Vision-based Inspecting Colors of Multiple-wire Harnesses,” FUTECH 2020, Jan. 2020
- “Layered Architecture of Device Virtualization and Functional Collaboration for Efficient Cyber Services Configurability,” ICUFN 2016, July 2016
1. Hyung-Man Kim*, “Challenges to Sustainable Energy for Global Environment,” International Conference on Advanced Complex Inorganic Nano-materials 2013, IL46, 2013. 7. 18, Invited Lecture in international conference ACIN 2013
2. Kiwon Park, Bonghwan Lee, Hyung-Man Kim*, Kap-Seung Choi, Gunyong Hwang, Gi-Sig Byun, Hyung-Ki Lee, “IPMC Based Biosensor for the Detection of Biceps Brachii Muscle Movements,” International Journal of Electrochemical Science Vol. 8, pp. 4098-4109, 2013. 3 (SCI, IF 3.729)
3. Bonghwan Lee, Kiwon Park, Hyung-Man Kim*, “Numerical Optimization of Flow Field Pattern by Mass Transfer and Electrochemical Reaction Characteristics in Proton Exchange Membrane Fuel Cells,” International Journal of Electrochemical Science Vol. 8, pp. 219-234, 2013. 1 (SCI, IF 3.729)
4. Bonghwan Lee, Kiwon Park, Hyung-Man Kim*, “Dynamic Simulation of PEM Water Electrolysis and Comparison with Experiments,” International Journal of Electrochemical Science Vol. 8, pp. 235-248, 2013. 1 (SCI, IF 3.729)
5. Kap-Seung Choi, Hyung-Man Kim*, “Current advances in polymer electrolyte fuel cells based on the promotional role of under-rib convection,” Fuel Cells, Vol. 12(6), pp. 908-938, 2012. 12 (SCI, IF 3.419)
6. Kap-Seung Choi, Beom-Gi Kim, Kiwon Park, Hyung-Man Kim*, “Flow control of under-rib convection enhancing the performance of proton exchange membrane fuel cell,” Computers & Fluids Vol. 69, pp. 81-92, 2012. 9 (SCI, IF 1.810)
7. Sang-Hoon Jang, Se-Joon Hwang, SangKi Park, Kap-Seung Choi, Hyung-Man Kim*, “Effects of PM fouling on the heat exchange effectiveness of wave fin type EGR cooler for diesel engine use,” Heat and Mass Transfer Vol. 48, pp. 1081-1087, 2012. 6 (SCI, IF 0.896)
8. Kap-Seung Choi, Hyung-Man Kim*, Sung-Mo Moon, “An experimental study on the enhancement of the water balance, electrochemical reaction and power density in a polymer electrolyte fuel cell by under-rib convection,” Electrochemistry Communications Vol. 13, pp. 1387-1390, 2011. 11 (SCI, IF 4.859), Excellent research achievement recognized by the Ministry of Education and Science and National Research Foundation of Korea
9. Hyung-Man Kim*, “South Korean energy plan is unrealistic,” Nature 477, 280, 2011. 9. 15 (SCI, IF 36.280), Excellent Research Award for the first publication in INJE University
10. Sang-Hoon Jang, GiSoo Shin, Hana Hwang, Kap-Seung Choi, Hyung-Man Kim*, “Numerical Studies of PEM Fuel Cell with Serpentine Flow-Field for Sustainable Energy Use,” World Renewable Energy Congress 2011, FC-0623, 2011. 5. 12
11. Sang-Hoon Jang, SangKi Park, Kap-Seung Choi, Hyung-Man Kim*, “Experimental investigation of the influences of shape and surface area on the EGR cooler efficiency,” Heat and Mass Transfer Vol. 47, pp. 621-628, 2011. 5 (SCI, IF 0.896)
12. Injae Choi, Gisoo Shin, Kap-Seung Choi, Hyung-Man Kim*, “Performance Evaluation of Micro PEM Fuel Cell through the Numerical Analysis and Fabrication of Micro-Cannel,” World Electric Vehicle Journal Vol. 3 - ISSN 2032-6653, 2011. 2
13. Kap-Seung Choi, Hyung-Man Kim*, Sung-Mo Moon, “Numerical studies on the geometrical characterization of serpentine flow-field for efficient PEMFC,” International Journal of Hydrogen Energy Vol. 36, pp. 1613-1627, 2011. 1 (SCI, IF 4.054)
14. SangKi Park, Kap-Seung Choi, Hyung-Man Kim*, Kihyung Lee, “Influence of PM fouling on effectiveness of heat exchanges in a diesel engine with fin-type EGR coolers of different sizes,” Heat and Mass Transfer Vol. 46, pp. 1221-1227, 2010. 11 (SCI, IF 0.896)
15. Kap-Seung Choi, Sang-Hoon Jang, Gisoo Shin, Hyung-Man Kim*, Hyung-Chul Yoon, Mattew E. Forrest, Paul A. Erickson, “Effects of stack array orientation on fuel cell efficiency for auxiliary power unit applications,” International Journal of Automotive Technology Vol. 11, pp. 429-434, 2010. 6 (SCI, IF 0.606)
16. Gisoo Shin, Sang-Hoon Jang, Kap-Seung Choi, Hyung-Man Kim*, “Numerical Studies of Newly-designed Fin & Serpentine Channel in PEMFC,” 5th International Ege Energy Symposium and Exhibition, 2010. 6. 27
17. Kap-Seung Choi, In-Jae Choi, Se-Joon Hwang, Hyung-Man Kim*, J. Lars Dorr, Paul A. Erickson, “An experimental study of methanol autothermal reformation as a method of producing hydrogen for transportation applications,” International Journal of Hydrogen Energy Vol. 35, pp. 6210-6217, 2010. 6 (SCI, IF 4.054)
18. Kap-Seung Choi, Hyung-Man Kim*, J. Lars Dorr, Hyung Chul Yoon, Paul A. Erickson, “Equilibrium model validation through the experiments of methanol autothermal reformation,” International Journal of Hydrogen Energy Vol. 33, pp. 7039-7047, 2008. 12 (SCI, IF 4.054)
19. Hyung Chul Yoon, Paul A. Erickson*, Hyung-Man Kim, “Lowering the O2/CH3OH ratio in autothermal reforming of methanol by using a reduced copper-based catalyst,” International Journal of Hydrogen Energy Vol. 33, pp. 6619-6626, 2008. 11 (SCI, IF 4.054)
20. Kap-Seung Choi, Hyung-Man Kim*, Hyung Chul Yoon, Mattew E. Forrest, Paul A. Erickson, “Effects of ambient temperature and relative humidity on the performance of Nexa fuel cell,” Energy Conversion and Management Vol. 49, pp. 3505-3511, 2008. 9 (SCI, IF 2.216)
21. H.-M. Kim, S.-K. Park, K.-S. Choi, H.-M. Wang, D.-H. Lee*, Y.-S. Cha, J.-S.-Lee, J. Lee, “Investigation on the flow and heat transfer characteristics of diesel engine for coolers,” International Journal of Automotive Technology Vol. 9, No. 2, pp. 149-153, 2008. 5 (SCI, IF 0.606)
- 국내학술지
1. “메탄-공기 예혼합기의 열면점화에 미치는 촉매반응 및 자연대류의 영향,” 김 형만, 정 종수, 한국연소학회지 제2권 제1호, pp. 29-38, 1997. 11.
2. “최신 폐기물 소각 전략,” 김 형만, 정 종수, 한국폐기물학회지 제14권 제8호, pp. 933-947, 1997. 12.
3. “간단하며 신뢰성이 있고 경제적인 폐기물 소각기술 전략,” 김형만, 인제논총 제14권 제3호, pp. 387-410, 1999. 2.
4. “Experimental Study on the Blended Coal Combustion Characteristics,” 김형만, 인제논총 제14권 제3호, pp. 411-425, 1999. 2.
5. “열면점화에 미치는 촉매반응 및 자연대류의 영향,” 김형만, 인제논총 제15권 제1호, pp. 571-584, 1999. 12.
6.“Effects of Ambient Pressure on Catalytic Combustion over Spherical Platinum,” 김형만, 인제논총 제15권 제1호, pp. 585-596, 1999. 12.
7.“백금촉매의 표면반응에 미치는 압력의 영향에 관한 실험 및 이론적 연구,” 김형만, 한국 연소학회지 제5권 제1호, pp. 1-6, 2000. 11.
14.“비례제어방식 솔레노이드 밸브 압력제어특성에 관한 수치해석,” 김형만, 태혁준, 이현우, 이창훈, 한국자동차공학회논문집 제11권 제6호, pp. 80-85, 2003. 11.
15.“나선형 홈이 있는 벤틸레이티드 브레이크 디스크의 열방출 성능,” 최영, 최주원, 김형만, 서용위, 한국정밀공학회 논문집 제21권 제3호, pp. 117-123, 2004. 3.
16."자동차 트렁크용 가스스프링의 설치 하중해석," 김형만, 최갑승, 강일환, 인제논총 제21권 제1호, pp. 341-350, 2006.2.28.
17. "자동차 트렁크 설치 가스스프링의 동적 하중해석," 최갑승, 강일환, 김형만, 한국산학연논문집 제6권 제1호, pp. 47-52 , 2006.3.1.
- 국제학술대회
1. "Numerical Study on the Structure and Extinction of Stretched Lean H2/Air Premixed Flames," H. M. Kim, S. R. Lee and S. H. Chung, The 6th Int. Symp. on Transport Phenomena in Thermal Engineering, 1992. 5. 9.
2. "Effects of Natural Convection and Catalytic Reaction on the Hot Surface Ignition of Methane-Air Mixtures," H. M. Kim, H. Enomoto, H. Kato and M. Kono, The 3rd KSME/JSME Thermal Engineering Conference, 1996. 10. 20.
3. "열면점화에 의한 점화과정에 미치는 표면산화의 영향," H. M. Kim, H. Enomoto, H. Kato, M. Tsue and M. Kono, 일본 제34회 연소심포지엄, 1996. 11. 27.
4. "An Experimental and Numerical Study on the Hot Surface Ignition of Methane-Air Mixtures in Microgravity," H. M. Kim, H. Enomoto, H. Kato, M. Tsue and M. Kono, The 1st Asia-Pacific Conference on Combustion, pp. 361-364, 1997. 5. 12.
5. "Study on the Blended Coal Combustion Characteristics," H. M. Kim, S. H. Yang and S. C. Kim, 2nd Korea-China Joint Workshop on Coal Utilization Technology, pp. 79-96, 1998. 11. 3.
6. "Experimental Study on the Combustion Characteristics of Blended Coals," Hyung-Man Kim, Seung Han Yang and Sung Chul Kim, The 4th JSME-KSME Conference, B111, 2000. 10. 2.
7. "Catalytic Effect of Sludge on NOx Removal for Combined BaTiO3 and Sludge Packed-bed Reactor," Jae-Yoon Park, Kyung-Ho Lee, Doong Hoon Lee, Myung-whan Bae, Hyung-Man Kim, Busan Engine International Symposium 2001, pp. 191-195, 2001. 12. 13.
8. "Effect of Intake Mixture Temperature on Performance and Exhaust Emissions in Diesel Engines with Scrubber EGR System," Myung-whan Bae, Chang-sung Ryu, Hyung-Man Kim, Kazuo Tsuchiya and Yoshihiro Mochimaru, The 68th Annual Meeting of Japan Institute of Marine Engineering, pp. 51-58, 2002. 11. 20.
9. "In situ Measurement of Average Surface Temperature at Combustion Chamber of Diesel Engine," Hyung-Man Kim, Chang-Ho Kim, Dong-Je Lee, 11th APCNDT November 3-7, 2003, at Jeju, Korea.
10. "Development of Surface Welding Method for Surface Temperature Measurement of an IC Engine's Combustion Chamber," Hyung-Man Kim, Kap-Seung Choi, Chang-Ho Kim and Dong-Jae Lee, The 6th International Conference on Fracture and Strength of Solids, pp. 455-460, April 4-6 2005, at Bali, Indonesia
11. "Numerical Analysis of Pressure Control Characteristics in a Solenoid Valve," Hyung-Man Kim, Hae-Il Jung, Hak-Min Wang, and Hyeok-Jun Tae, 13th International Pacific Conference on Automotive Engineering (IPC-13), pp. 1109-1115, August 22-24 2005, at Gyeongju, Korea.
12. "Computational Analysis of Pressure Control Characteristics in a VFS Solenoid Valve," Hyung-Man Kim, Il-Hwan Kang, Hae-Il Jung, and Hak-Min Wang, Int. Symposium on Mechanical & Aerospace Engineering 2005, pp. 161-166, 2005. 8. 22.
13. "An Experimental Study on the Surface Temperature Measurement of a Marine Engine's Combustion Chamber," Hyung-Man Kim, Kap-Seung Choi, and Il-Hwan Kang, The 18th Internal Combustion Engine Symposium (International), No. 20056097-95, December 20-22 2005, at Jeju, Korea.
14. "Computational Analysis of Pressure Control Characteristics in a VFS Solenoid Valve," Hyung-Man Kim, Hak-Min Wang, Il-Hwan Kang, Kap-Seung Choi, Hyeok-Jun Tae SAE 2006 World Congress & Exhibition, 2006.4.6. Detroit, USA
15. "Analysis of Gas flow in Micro Channels for high performance of Micro Fuel Cell," Hak-Min Wang, Hyung-Man Kim, Nobuyuki Takama and Beomjoon Kim, ICCHT2006-2nd International Conference on Cooling and Heating Technologies, 2006.7.1. China, 2007.4.1.
16. "Effects of the Internal Shape of EGR Cooler on Heat Exchanger Efficiencies," Sang-Ki Park, Kap- Seung Choi, Hak Min Wang, Hyung-Man Kim, Dae-Hee Lee, Tae-Jin Kim, Joon Lee and Young-kuk Cho, SAE 2007 World Congress & Exhibition, 2007.4.1. Detroit, USA
17. "Dynamic Analysis of Vehicle Trunk Lid with 4-Bar Link Structure," Kap-Seung Choi, Sang-Ki Park, Hak-Min Wang, Yeong-Hum Jin, Chae-Wook Lim, Hyung-Man Kim, SAE 2007 World Congress & Exhibition 2007.4.1. Detroit, USA
18. "Heat Exchange Effiency Characteristcs of EGR Cooler with Stack-Type or Shell & Tube-Type," Sang-Ki Park, Kap-Seung Choi, Hak-Min Wang, Hyung-Man Kim, Dae-Hee Lee, Tae-Jin Kim, Joon Lee, 14th Asia Pacific Automotive Engineering Conference, 2007.8.5. Los Angeles, USA
19. "Numerical Analysis of Channel Flow Characteristic in Micro PEM Fuel Cell," Dae-Young Kim, Hak-Min Wang, Kap-Seung Choi, Hyung-Man Kim, The First International Symposium on Advanced Vehicle Engineering, 2008, 2008.2.22. Busan, Korea
20. "Study on the Influence of the EGR Cooler Type upon Heat Exchange Efficiency in Diesel Engine," Min-chol Kim, Sang-Ki Park, Kap-Seung Choi, Hyung-Man Kim, The First International Symposium on Advanced Vehicle Engineering, 200 ,2008.2.22. Busan, Korea
21. "Numerical Analysis and Fabrication of Flow Channel using SU-8 for High Performance of Micro PEM Fuel Cell," Hak-Min Wang, Kap-Seung Choi, Hyung-Man Kim, EET-2008 European Ele-Drive Conference,2008.3.11. Busan, Korea
-국내학술대회
1. “수소 예혼합화염의 구조에 관한 수치해석,” 김형만, 이수룡, 정석호, 대한기계학회 학술대회, 1992. 4. 28.
2. “The Influence of Natural Convection on the Hot Surface Ignition of Methane-Air Mixtures," H. M. Kim, H. Enomoto, S. H. Chung and M. Kono, KOSCO Symposium, 1995. 12. 9.
3. "열선에 의한 메탄-공기 예혼합기의 점화에 미치는 촉매반응 및 자연대류의 영향," 김형만, 정 종수, 한국자동차공학회 춘계학술대회, pp. 684-689, 1997. 6. 27.
4. "열면점화에 미치는 촉매반응의 영향," 손영목, 김형만, 한국자동차공학회 부산·경남·울산지부 학술대회, pp. 8-16, 한국연소학회, 2000. 3. 17.
5. "축분 혼합 고형연료의 연소성에 관한 실험적 연구," 손영목, 김형만, 김무근, 제20회 KOSCO Symposium, pp. 93-104, 2000. 5. 17.
1. “An Inverse Algorithm of Nonlinear Load-Displacement for a Slotted Disc Spring Geometric Design”, pp.137-146, Vol.14, International Journal of Precision Engineering and Manufacturing, 2013.3
2. “A Study on Robust Estimation of Rear Side Vehicle Recognition on Curved Road by using Rear Side View Vision System”, International Symposium on Green Manufacturing and Applications, 2013.6
3. “Evaluation of the Automatic Lane Keeping Control based upon a Perception Action Network”, , International Symposium on Green Manufacturing and Applications, 2013.6
4. “The Prediction of Dynamic Fatigue Life of Multi-axial Loaded”, 9th International Conference on Fracture & Strength of Solids, 2013.6
5. “Low Frequency Squeal Noise Reduction using Mode Participation Factor in Complex Eigenvalue Analysis”, 9th International Conference on Fracture & Strength of Solids, 2013.6
6. “Development of vehicle side collision avoidance system with SILS”, APAC-17, 2013.4
7. "Comparison of model-referenced and map-based control method for vehicle stability enhancement", APAC-17, 2013.4
11. "A Study on the Grooving Process of a Cross-scored Rupture Disc", pp.219-227, Vol.13, International Journal of Precision Engineering and Manufacturing, 2012.2
12. "Brake Performance Evaluation of ABS with Sliding Mode Controller on a Split Road with Driver Model", pp.31-38, Vol.12, International Journal of Precision Engineering and Manufacturing, 2011.2
13. "Temperature Effect of Low Velocity Impact Resistance of Glass/epoxy Laminates", pp.2657-2663, Vol.24, International Journal of Modern Physics B, 2010.12
- 번역서: 장재신외 5명, 확률과 랜덤과정 : 기초와 응용 (2판), 2017년 2월 22일, 한티미디어
- 저서: 장재신, TIMS툴을 이용한 아날로그통신 및 디지털통신 실험, 2011년 7월, 진영기획
- 논문: Jaeshin Jang and Balasubramaniam Natarajan, "Performance analysis of an enhanced cooperative MAC protocols in mobile ad hoc networks," EURASIP Journal on Wireless Communications and Networking(SCI-E), No. 76, pp. 1~15, April 2018.
- 논문: Jaeshin Jang and Balasubramaniam Natarajan, "Design of an energy-aware enhanced cooperative MAC protocol in mobile ad hoc networks," Journal of Marine Science and Technology(SCI-E), Vol. 27, No. 1, pp. 46~54, February 2019.
1. "Performance investigation of thermoelectrics with an external spacer inserted in serious," Jake Kim, Y. T. Kang, S. N. Kim, J. H. Hwang, S. G. Lee, H. K. Hong, M. G. Kim, 2008, Int. Journal of Thermal Sciences, Vol. 47, No. 4.
2. "The effect of chemical surfactants on the absorption performance during NH3/H2O bubble absorption process," J. K. Kim, J. Y. Jung, J H. Kim, M. G. Kim, T. Kashiwaki, Y. T. Kang, 2006, Int. Journal of Refrigeration, Vol. 29, pp.170-177.
3. "Effects of thermodiffusion and nanoparticles on convective instabilities in binary nanofluids," J. K. Kim, C. K. Choi, Y. T. Kang, M. G. Kim, 2006, Nanoscale and microscale thermophysical engineering, Vol. 10, pp.29-39.
4. "Ultrasonic monitoring technique for icing and flow in duct," Y. H. Choi, M. G. Kim, 2004, Key engineering materials, Vol. 270, pp.396-401.
5. "Turbulent heat transfer from a convex hemispherical surface to a round impinging jet," D. H. Lee, Y. S. jung, M. G. Kim, 1999, Int. J. Heat Mass Transfer, Vol.42, pp.1147-1156.
6. "Two-dimensional freezing of water filled between vertical concentric tubes involving density anomaly and volume expansion," C-J. Kim, S. T. Ro, J. S. Lee and M. G. Kim, 1993, Int. J. Heat Mass Transfer, Vol.36, No.10. pp.2647-2656.
-국내 학술지 게재논문
1. "실제기체 상태방정식을 적용한 열압축기 내부유동에 대한 수치해석," 강위관, 최두열, 신지영, 김무근, , 2011, 한국 마린엔지니어링학회지, 35권 2호, pp.216-223.
2. "히트파이프를 장착한 디스크 브레이크의 냉각성능에 관한 연구," 김무근, 고성규, 이문완, 2008, 한국 마린엔지니어링학회지, 32권 4호, pp.563-569.
3. "과냉회로를 갖는 이산화탄소 냉동시스템에 대한 성능 해석," 김진만, 고성규, 김무근, 2007, 한국 마린엔지니어링학회지, 31권 6호, pp.723-728.
7. "Performance analysis of sensible and latent energy recovery system for thermally controlled facility," B. K. Park, M. G. Kim, G. O. Kim, 2001, International Journal of Air-Conditioning, Vol.9, No.4, pp.17-26.
10. "Melting of ice on the heating plate with split fins," H. K. Hong, M. G. Kim, 2001, International Journal of Air-Conditioning, Vol.9, No.2, pp.1-7.
12. "Numerical study on the vertical Bridgman crystal growth with thermosolutal convection," M. G. Kim et al., 2001, KSME International Journal, Vol.15, No.8, pp.1188-1195.
22. "태양열에 의한 냉방 및 난방 시스템의 성능 향상 (II)" 박문수, 김무근, 김효경, 노승탁, 1989, 공기조화 냉동공학 논문집, Vol.1, No.1, pp.47-54.
-국외 학술대회
1. "Analysis of the thermal performance of cosmetics refrigerator by thermorlectric cooling," S. K. Ko, J. M. Kim, M. G. Kim, 2007, The 22nd IIR International congress of refrigeration.
2. "Study for the adsorption process through solid dessicant," S. K. Ko, M. G. Kim, 2007, The 3rd International conference on the cooling and heating technologies.
3. "Ultrasonic monitoring technique for icing and flow in duct," M. H. Lee, H. M. Jung, M. G. Kim, 2006, The 2nd International conference on the cooling and heating technologies.
4. "Numerical study on the vertical Bridgman crystal growth with thermosolutal convection," M. G. Kim, J. M. Kim, M. W. Lee, 2005, Int. Symposium on Transport Vehicle Engineering.
5. "Mathematical model for flow through solid desiccant in baffle plates," M. G. Kim, J. M. Kim, M. W. Lee, 2005, Int. Symposium on mechanical & aerospace engineering.
6. "Simulation if heatrecovery system using TRNSYS," M. G. Kim, Y. J. Kim, 2004, Int. Symposium on mechanical & aerospace engineering.
7. "Numerical study on the vertical Bridgman crystal growth with thermosolutal convection," M. G. Kim, G. O. Kim, 2000, 4th JSME-KSME Thermal Engineering Conference.
8. "Melting of ice on the heating plate with split fins," Hili Hong, M. G. Kim and J.W. Seo, 1998, Int. Conference on Solid-Liquid Phase Change, Seoul.
9. "Numerical analysis of the effect of a magnetic field on the crystal-melt interface and oxygen distribution in Czochralski silicon crystal growth," M. G. Kim, J. S. Suh, 1997, The 10th ISTP in Thermal Science and Process Engineering.
10. "Analysis of Ice-formation in a stenotic tube," J. S. Suh, S. T. Ro and M. G. Kim, 1996, The 5th International Symposium on Thermal Engineering and Sciences for Cold Regions, Ottawa, Canada.
11. "Effect of cusp magnetic field on the Czochralski single crystal growth," M. G. Kim and J. S. Suh, 1996, The 9th ISTP in Thermal-Fluids Engineering, Singapore.
12. "Effects of the pulling rate on the interface curvature during the Czochralski silicon crystal growth," M. G. Kim, C. J. Kim and S. T. Ro, 1994, International Conference on Fluid and Thermal Energy Conversion, Bali, Indonesia.
13. "Numerical simulation of the solidification process with volume contraction," C. J. Kim, S. T. Ro and M. G. Kim, 1993, The 6th ISTP in Thermal Engineering, Seoul.
14. "Effects of density change and natural convection on freezing of water around a vertical tube," C. J. Kim, S. T. Ro, J. S. Lee and M. G. Kim, 1992, The 2nd JSME-KSME Thermal Engineering Conference.
-국내 학술대회
1. "과냉회로를 갖는 이산화탄소 냉동시스템의 성능 해석," 김유진, 김무근, 김욱중, 2004, 대한설비공학회 2004년 하계학술대회.
2. "이산화탄소 사이클에서 팽창장치의 영향에 관한 수치적 연구," 김무근, 김욱중, 김유진, 2003, 대한설비공학회 2003년 하계학술대회.
3. "열전모듈을 이용한 쇼케이스 냉장 챔버의 성능 특성에 관한 연구," 진정훈, 조지룡, 김무근, 2002, 대한설비공학회 2002년 동계학술대회.
4 "CO2 냉방사이클의 내부 열교환기에 대한 연구," 김무근, 박병규, 이영철, 2002, 대한설비공학회 2002년 하계학술대회.
5. "자연냉매용 밀집형 증발기의 열성능에 미치는 불균일 공기유동분포의 영향," 박병규, 김근오, 김무근, 2001, 대한설비공학회 2001년 동계학술대회.
6. "초기시동시의 모세펌핑 루프 증발기에 대한 과도열전달 해석," 박병규, 김근오, 김무근, 2001, 대한기계학회 2001년 춘계학술대회.
1.“Experimental Study of a Nonlinear Viscoelastic Model for Elastomeric Bushing in Torsional Mode”, Asian Journal of Chemistry, Vol. 25, No. 9, pp. 5129-5132, 2013.
2.“Reliability Evaluation of Rubber Component”, Asian Journal of Chemistry, Vol. 25, No. 9, pp. 5133-5137, 2013.
3.“A Comparison among Neo-Hookean model, Mooney-Rivlin model, and Ogden model for Chloroprene rubber”, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 5, pp. 759-764, 2012.
4.“A Study on the Grooving Process of a Cross-scored Rupture Disc”, International Journal of Precision Engineering and Manufacturing”, Vol. 13, No. 2, pp. 219-227, 2012.
“An Experimental Study and Finite Element Analysis of Weatherstrip”, International Journal of Precision Engineering and Manufacturing”, Vol. 12, No. 1, pp. 97-104, 2011.
5.“Effect of a fastener hole design of inlet flanges on the durability of the exhaust manifold for a turbo-diesel engine, Beomkeun kim, Seong Beom Lee, and Eunhyun Lee, 2007(June), Journal of Automobile Engineering, pp327-pp333 2007.
6. “Development of robust design optimization using incomplete data", Seong Beom Lee, Chanseok Park, 2006(July), Computers & Industrial Engineering, pp345-pp356, 2006.
7. “A Study on the Relationship of Frequency and Deformation for Viscoelastic Material", Seong Beom Lee and Youn Ho Cho, 2005(November), Key Engineering Materials, pp225-pp230, 2005.
8. "A model for nonlinear viscoelastic coupled mode response of an elastomeric bushing" Lee, Seong Beom & Wineman, Alan S., International Journal of Non-Linear Meachanics, Vol. 35, No. 2, pp. 177-199, 2000.
9. "A model for nonlinear viscoelastic torsional response of an elastomeric bushing" Lee, Seong Beom & Wineman, Alan S., Acta Mechanica, Vol.135, No.3-4, pp. 199-218,1999.
10. "A model for non-linear viscoelastic axial response of an elastomeric bushing" Lee, Seong Beom & Wineman, Alan S., International Journal of Non-Linear Mechanics, Vol. 34, No. 5, pp. 779-793, 1999.
- “Automatic contrast enhancement by transfer function modification," ETRI Journal, vol. 39, no. 1, 2017
- "IR-band conversion of target and background using surface temperature estimation and error compensation for military IR sensor simulation," MDPI Sensors, vol. 19, Issue 11, 2019
- "IR-composite image generation by wavelength-band based on temperature synthesis estimated from IR target signature and background scene," Journal of Sensors, vol. 2019, Article ID 9423976, 2019
1. Simulated crack propagation in cemented total hip replacements” MATERIALS SCIENCE & ENGINEERING A, 2007
2. A Study on an anti-lock braking system controller and rear-wheel controller to enhance vehicle lateral stability, IMechE 2007, 2007
3. Nonlinear Observer and Bobust Controller Design for Enhancement of Vehicle Lateral Stability, Journal of Mechanical Science and Technology, 2007
4. A study on Relationship between Hardness and Hydrostatic Stress, Key Engineering Materials, 2006. 03.
5. 빌릿 마킹 공정의 자동화를 위한 마킹 위치 인식 방법“ 한국정밀 공학회지, 2005. 06
6. Model developement and control methodology of a new electric power steering system” Proceedings of the I MECH E Part D Journal of Automobile Engineering, 2004.09
7. A STUDY ON PERCEPTION METHOD OF THE MARKING LOCATION FOR AN AUTOMATION OF BILLET MARKING PROCESSES, International Conference On Control, Automation and Systems 2004, 2004.08
8. Development of a New Transformer Type Torque Sensor, Key Engineering Materials, 2004.07
9. A Study on an Accurate Seam Detecting Sensor for Laser Welding Automation” Key Engineering Materials, 2004.07
10. Performance evaluation of traction control systems using a vehicle dynamic model” Proceedings of I MECH E Part D J of Automobile Enginnering, 2004.02
12. Development of the hybrid type electric brake system(HEBS)” International Conference on Control, Automation, and Systems., 2002.10
13. A study on a lane keeping control in a curved road and lane changing method to avoid collision of a vehicle.” International Conference on Control, Automation, and Systems. 2002.10
14. Development of an Image Processing Hardware for Detecting Defects onthe surface of the High Speed Moving Plate.” International Conference on Control, Automation, and Systems., 2002.10
15. Analysis of dynamic characteristics of a new electric power steering system” International Conference on Control, Automation, and Systems., 2002.10
16. A user-friendly automatic control system for electro-slag remelting process" ICASE, 2002.02
1. Baughn, J.W., Hoffman, M.A., and Lee, D.H., "An Instrument for the Heat Flux Measurements from a Contour of a Surface with Uniform Temperature," Review of Scientific Instruments, Vol. 65, No. 3, pp. 689-694, 1994.
2. Lee, S.J., Lee, J.H., and Lee, D.H., "Local Heat Transfer Measurements from an Elliptic Jet Impinging on a Flat Plate Using Liquid Crystal," International Journal of Heat and Mass Transfer, Vol. 37, No. 6, pp. 967-976, 1994.
3. Lee, D.H., Grief, R., Lee, S.J., and Lee, J.H., "Heat Transfer from a Flat Plate to a Fully Developed Axisymmetric Impinging Jet," ASME Trans. Journal of Heat Transfer, Vol. 117, pp. 772-776, 1995.
4. Lee, D.H., Stevens, P.C., Zeng, J.S.Q., and Hunt, A.J., "Thermal Characterization of Carbon Opacified Silica Aerogels," Journal of Non-Crystalline Solids, Vol. 186, pp. 285-290, 1995.
5. Kim, D.S., Lee, D.H., Kim, K.C., and Yoon, S.H., "Flow and Heat Transfer Measurements of a Wall Attaching Offset Jet," International Journal of Heat and Mass Transfer, Vol. 39, No. 14, pp. 2907-2913, 1996.
6. Lee, D.H., and Bollinger, B., "The Development of Combustion Laboratory Test Apparatus for Mechanical Engineers," International Journal of Mechanical Engineering Educations, Vol . 24, No. 1, pp. 1-10, 1996.
7. Stevens, P.C., Zeng, J.S.Q., Hunt, A.J., Grief, R., and Lee, D.H. "Thin-Film-Heater Thermal Conductivity Apparatus and Measurement of Thermal Conductivity of Silica Aerogel," International Journal of Heat and Mass Transfer, Vol. 39, No. 11, pp. 2311-2317, 1996.
8. Lee, D.H., Chung, Y.S., and Kim, D.S., "Turbulent Flow and Heat Transfer Measurements on a Curved Surface with a Fully Developed Round Impinging Jet," International Journal of Heat and Fluid Flow, Vol. 40, No. 1, pp. 160-169, 1997.
9. Yoon, S.H., Kim, M.K., and Lee, D.H., "Turbulent Flow and Heat Transfer Measurements Characteristics of a Two-Dimensional Oblique Plate Impinging Jet," KSME International Journal, Vol. 11, No. 4, pp. 476-483, 1997.
10. Lee, D.H., Chung, Y.S., and Kim, M.G., "Turbulent Heat Transfer From a Convex Hemispherical to a Round Impinging Jet," International Journal of Heat and Mass Transfer, Vol. 42, No. 6, pp. 1147-1156, 1999.
11. Chung, Y.S., Lee, D.H., and Lee. J.S., "Heat Transfer Characteristics of an Axisymmetric Jet Impinging on the Rib-Roughened Convex Surface," International Journal of Heat and Mass Transfer, Vol. 42, No. 11, pp. 2101-2110, 1999.
12. Lee, D.H., Chung, Y.S., and Won, S.Y., "The Effect of Concave Surface Curvature on Heat Transfer from a Fully Developed Round Impinging Jet," International Journal of Heat and Mass Transfer, Vol. 42, No. 13, pp. 2489-2497, 1999.
13. Lee, D.H., Chung, J.H., Won, S.Y., Kim, Y.T., and Boo, K. S., "A New Liquid Crystal Color Calibration Technique Using Neural Networks and Median Filtering," KSME International Journal, Vol. 14, No. 1, pp. 113-120, 2000.
14. Song, H.B., Yoon S.H., and Lee, D.H., "Flow and Heat Transfer Characteristics of a Two-Dimensional Oblique Wall Attaching Offset Jet," International Journal of Heat and Mass Transfer, Vol. 43, No. 13, pp. 2395-2404, 2000.
15. Lee, D.H., Lee, Y.M., Kim, Y.T., Won, S.Y., and Chung, Y.S., "Heat Transfer Enhancement by the Perforated Plate Installed Between an Impinging Jet and the Target Plate," International Journal of Heat and Mass Transfer, Vol. 45, No. 1, pp. 213-217, 2001.
16. Lee, D.H., Won, S.Y., Kim, Y.T., and Chung, Y.S., "Turbulent Heat Transfer from a Flat Surface to a Swirling Round Impinging Jet," International Journal of Heat and Mass Transfer, Vol. 45, No. 1, pp. 223-227, 2001
17. Song, J.H. and Lee, D.H., "Experimental Study of Ignition of a Gasoline-Air Mixture in a Constant Volume Combustion Chamber," Combustion, Explosion and Shock Waves, Vol. 39, No. 5, pp. 513-524, October 2003
18. Lee, D.H, Song, J.H., and Jo, M.C., "The Effects of Nozzle Diameter on Impinging Jet Heat Transfer and Fluid Flow," ASME Trans. Journal of Heat Transfer, Vol. 126, pp. 554-557, June 2004.
19. Chung, Y.S., Lee, D.H. and Ligrani, P.M., "Jet Impingement Cooling of Chips Equipped with Cylindrical Pedestal Profiles," ASME Trans. Journal of Electronic Packaging, Vol. 127, No. 2, pp. 106-112, June 2005.
20. Lee, D.H., Lim, C.Y., Jeon, M.H., Kim, M.K., Park, S.B., and Lee, K.S., "Local Heat Transfer Measurements Using Liquid Crystal Thermography Technique," Key Engineering Materials, Vol. 326-328, pp. 1295-1300, September 2006 (Trans Tech Publications, Switzerland)
21. Lee, D.H., Lim, C.Y., Yoon, K.I., Kim, M.S., Kim, M.K., Park, S.B., and Lee, K.S., "Local Heat Transfer Measurements and Numerical Analysis in the Cooling Passage of the Ventilated Disc Brake with Semi-Cylindrically Grooved Surface," Key Engineering Materials, Vol. 326-328, pp. 1305-1308, September 2006 (Trans Tech Publications, Switzerland)
22. Song, J.H., Boo, K.S., and Lee, D.H., "Nonlinear Observer and Robust Controller Design for Enhancement of Vehicle Lateral Stability," Journal of Mechanical Science and Technology, Vol. 21, No. 1, pp. 98~105, January 2007
23. Kang, H.K., Ahn, S.W., Bae, S.T., and Lee, D.H., "Analysis of the Heat Transfer and Friction in a Ribbed Square Channel Using Numerical and Experimental Methods," Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering Vol. 221, pp. 151~159, August 2007.
24. Lee, D.H., Chung, Y.S., and Ligrani, P.M., "Jet Impingement Cooling of Chips Equipped with Multiple Cylindrical Pedestal Profiles," ASME Trans. Journal of Electronic Packaging, Vol. 129, pp. 221~228, September 2007.
25. Park, S.B., Lee, K.S., and Lee, D.H., "An Investigation of Local Heat Transfer Characteristics in the Ventilated Disc Brake with Fluted Surfaces," Journal of Mechanical Science and Technology, Vol. 21, No. 12, pp. 2178~2187, December 2007.
26. Kim, M.K., Kim, D.K., Yoon S.H., and Lee, D.H., "Measurements of the Flow Fields around Two Square Cylinders in a Tandem Arrangement," Journal of Mechanical Science and Technology, Vol. 22, No. 2, pp. 397-407, February 2008.
27. Ahn, S.W., Kang, H.K., Putra, A.B., and Lee, D.H., "An Experimental Investigation of Heat Transfer and Friction in a Ribbed Square Channel" Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering Vol. 221, pp. 219-223, December 2007.
28. Kim, H.M. Lee, D.H., Park, S.K., Choi, K.S., and Wang, H.M., "An Experimental Study on Heat Exchange Effectiveness in the Diesel Engine EGR Coolers," Journal of Mechanical Science and Technology, Vol. 22, No. 2, pp. 361-366, February 2008.
29. Kim, H.M., Park, S.K., Choi, K.S., and Wang, H.M., Lee, D.H., Lee, D.K., Cha, Y.S., Lee, J.S., and Lee, J., "Investigation on the Flow and Heat Transfer Characteristics of Diesel Engine EGR Coolers,"International Journal of Automotive Technology, Vol. 9, No. 2, pp. 149-153, April 2008.
30. Ahn, S.W., Kang, H.K., Bae, S.T., and Lee, D.H., "Heat Transfer and Friction Factor in a Square Channel with One, Two, or Four Inclined Ribbed Walls,“ ASME Journal of Turbomachinery, Vol. 130, No. 3, Paper No. 034501, pp. 1-5, July 2008.
2. 이대희, 정영석, 김대성, 임경빈, "볼록한 반구면에 충돌하는 원형제트의 열전달 및 유동특성," 대한기계학회 논문집(B), 제21권 제4호, pp. 579-588, 1997.
3. 이대희,윤순현, 김문경, "2차원 경사 충돌제트의 열전달에 관한 실험적 연구," 공기조화 냉동공학 논문집, 제9권 제4호, pp. 427-434, 1997.
4. 임경빈, 이대희, “오목표면곡률이 난류원형충돌제트의 열전달에 미치는 영향,” 대한기계학회 논문집(B), 제21권 제5호, pp. 691-699, 1997.
5. 윤순현, 이대희, 송흥복, 심재경, "단이 진 경사벽면에 부착되는 2차원 평면제트의 열전달 효과에 관한 연구," 대한기계학회 논문집(B), 제21권 제10호, pp. 1314-1325, 1997.
6. 정영석, 이대희, 이준식 “표면조도를 가지는 볼목한 면에 충돌하는 제트에 의한 열전달계수 측정" 대한기계학회 논문집(B), 제22권 제3호, pp. 373-385, 1998.
7. 이대희, 심재경, 박성봉, 이재호, 윤순현, "터빈 블레이드 표면과 선형 익렬에서의 열전달 및 유동측정 연구," 대한기계학회 논문집(B), 제23권 제5호, pp. 567-576, 1999
8. 이대희, 원세열, 이준식 “표면조도를 가지는 오목한 면에 충돌하는 원형제트에 의한 열전달 측정," 대한기계학회 논문집(B), 제23권 제6호, pp.734-743, 1999.
9. 윤순현, 심재경, 우창수, 이대희, “사각주 후류가 선형터빈익렬의 유동 및 열전달에 미치는 영향에 관한 연구,” 대한기계학회 논문집(B), 제23권 제7호, pp. 864-870, 1999.
10. 이대희, 원세열, 이영민, 조헌노, “완전 발달된 원형 충돌제트의 노즐 직경이 열전달에 미치는 영향,” 대한기계학회논문집 B권, 제24권 제4호, pp. 519-525, 2000.
11. 김윤택, 이영민, 원세열, 이대희, “원형충돌제트에서 다공질판에 의한 열전달 향상,” 대한기계학회논문집 B권, 제25권 제4호, pp. 475-484, 2001. 04월
12. 이은현, 이준식, 이대희, “맥동 충돌제트의 열전달 특성,” 대한기계학회논문집 B권, 제26권 제7호, pp. 903-910, 2002. 7월
13. 이대희, 이준식, 정영석, 정승훈, “충돌제트를 이용한 Pedestal 형상의 칩 냉각연구,” 대한기계학회논문집 B권, 제27권 제1호, pp. 1-8, 2003. 1월.
14. 강상욱, 김창진, 이대희, 김흥섭, “솔리드모델과 2D 연성모델을 사용한 브레이크 디스크의 열해석,” 한국자동차공학회논문집, 제11권 제6호, pp. 93-100, 2003년 11월.
15. Lee, D.H., Lee, D.Y., Jo, M.C., Cho, H.N., and Kim, Y.S., “Development of a Highly Efficient Boiler System Using a Diesel Engine," Journal of The Korean Society of Marine Engineers, Vol. 28, No.2, pp. 367-375, 2004년 1월.
16. 송정훈, 김흥섭, 이대희, 손민혁, “차량 모델을 이용한 구동력 제어 시스템 (TCS)의 제어 방법 개발,” 대한기계학회논문집A, 제28권 제8호, pp. 1203-1211, 2004년 8월.
17. 배성택, 안수환, 김명호, 이대희, 강호근, “거친 사각채널에서 가열 벽면의 수가 열전달에 미치는 효과” 대한설비공학논문집, 제17권 제6호, pp. 514-520, 2005년 6월.
18. 배성택, 김명호, 안수환, 이대희, “일정 열유속을 가진 사각채널에서 거친 벽면의 수가 열전달에 미치는 효과,” 한국동력기계공학회지, 제9권 제1호, pp. 30-36, 2005년 2월.
19. 강호근, 안수환, 배성택, 이대희, “거친 사각채널에서 열전달과 유체유동 특성에 관한 실험 및 수치해석,” 한국마린엔지니어링학회, 제30권 2호, pp. 275-283, 2006년 3월.
20. 이대희, 박성봉, 임창율, 김흥섭, 이관수, “반 실린더형 홈을 가진 벤틸레이티드 디스크 브레이크에서의 국소열전달 측정 및 수치해석,” 대한기계학회논문집 B권, 제30권 6호, pp. 587-593, 2006년 6월.
21. 이대희, 박성봉, 임창율, 김흥섭, 이관수, “나선형 홈을 가진 브레이크 유로 내에서의 국소 열전달 측정 및 열 유동 해석,” 한국자동차공학회 논문집, 제14권 6호, pp. 104-111, 2006년 11월.
22. 이대희, 이대근, 차윤석, 이준식, "전자모듈의 배열에 따른 열전달특성의 실험적 연구," 대한기계학회논문집 B권 제32권 6호, pp. 407-412, 2008년 6월.
-국제학술회의 논문
1. Kim. D.S., Lee, D.H., Kim, K.C., and Yoon, S.H., "An Experimental Study in the Fluid Flow and Heat Transfer Characteristics of Wall Attaching Offset Jet," The Pennsylvania State University, PA. August 14-16, 1995, Proceeedings of Tenth Symposium on Turbulent Shear Flows,
2. Lee, D.H., Chung, Y.S., and Kim, D.S., "Turbulnet Heat Transfer Measurements on Curved Surface with a Fully Developed Round Impinging Jet," San Diego, CA, March 10-15, 1996, Proceedings of the International Conference on Turbulent Heat Transfer,
3. Lee, D.H., Chung, Y.S., and Kim, D.S., "Turbulent Flow and Heat Transfer Characteristics of an Axisymmetric Jet Impinging on a Curved Surface," Advances in Turbulence Research-1996, Korea University, May 17, 1996.
4. Kim, M.K., Kim, D.S., Lee, D.H., and Yoon, S. H., "Turbulent Heat Transfer Characteristics of a Two-Dimensional Impinging Jet on a Inclined Flat Plate," Proceedings of the Fourth International Symposium on Heat Transfer, Beijing, China, October 7-11, 1996.
5. Lee, D. H., Chung, Y.S., Kim, D.S., and Lim, K. B., "Turbulent Flow and Heat Transfer Measurements on a Concave Surface with a Round Impinging Jet," Kyongju, Korea, October 20-23, Proceedings of the 3rd KSME-JSME Thermal Engineering Conference, Vol. 1, pp. 535-540, 1996.
6. Song, H.B., Kim, D.S., Yoon S.H., and Lee, D.H., "Turbulent Flow and Heat Transfer From an Oblique Flat Plate to a Two-Dimensional Wall Attaching Offset Jet," Grenoble, France, September 9-12, Proceedings of the 11th Symposium on Turbulent Shear Flows, Vol. 1, pp. 71-76, 1997.
7. Yoon S.H., Sim, J.K., Jung, K.J., and Lee, D.H., "Influence of Unsteady Wake in a Linear Turbine Cascade," Pusan, Korea, October 18-21, Proceedings of the 4th KSME-JSME Fluids Engineering Conference, pp. 701-704, 1998.
8. Chung, Y.S., Lee, D.H., and Lee, J.S., "Turbulent Heat Transfer Measurement of a Jet Impinging on the Rib-Roughened Convex Surface," August 23-28, Kyongju, Korea, Proceedings of 11th International Heat Transfer Conference, vol. 5, pp. 421-426, 1998.
9. Lee, D.H., Lee, Y.M., Kim, Y.T., and Won, S.Y., "Heat Transfer Enhancement by the Perforated Plate Installed Between an Impinging Jet and the Target Plate," Proceedings of the 4th JSME-KSME Thermal Engineering Conference, Kobe, Japan, Vol. 2, pp. 649-654, October 1-6, 2000.
10. Lee, D.H., Lee, D.Y., Jo, M.C., and Kim, Y.S.., "Development of a Highly Efficient Boiler System Using a Diesel Engine," Proceedings of International Symposium on Combustion engine and Marine Engineering(ISCEM 2003) BUSAN, KOREA, pp. 129-136, October 22-24, 2003.
11. Lee D.H, Lim C.Y and Park S.B, "Local Heat Transfer Measurements and Numerical Analysis in the Cooling Passage of the Ventilated Disc Brake with Helically Fluted Surfaces," 13th International Heat Transfer Conference, Paper No. EQP-40, Australia, August 13~18, 2006.
12. Park, S.K., Choi, K.S., Wang, H.M., Kim,H.M., Lee,D.H., Kim,T.J., Lee,J., Cho,Y.K., "Effects of the Internal Shape of EGR Cooler on Heat Exchanger Efficiencies," 2007 SAE World Congress, Paper Number 2007-01-1252, Detroit, Michigan, April 16-19, 2007.
13. Lee, D.H., Lee, D.K., Cha, Y.S., and Lee, J.S., “Turbulent Heat Transfer Characteristics in Axisymmetric and Asymmetric Cavities", Daegeon, Korea, August 27-30, Proceedings of the 18th International Symposium on Transport Phenomena, ISTP18-211, 2007.
14. Lee, D.H., Lee, J. S., Cha, Y.S., Lee, D.K., and Jo, M.C., "Measurements of Air Temperature Distribution and Optimum Cooling Condition inside the Computer System", Fukuoka, Japan, September 12-14, Proceeding of the International Conference on Advanced Technology in Experimental Mechanics, P-48, 2007.
15. Lee, D.H., Cha, Y.S., Lee, J. S. Lee, D. K., Park, H. J., and Bae, G. Y., "Development of a Highly Efficient Diesel Engine Boiler System with a Secondary Combustor", Orlando, Florida, USA, July 22-24, Proceeding of Power2008 ASME Power, POWER2008-60029, 2008.
16. Lee, D.H., Cho, J.E., Lee, J.S., Lee, D.K., and Cha, Y.S., "Experimental and Numerical Study of Heat Transfer Downstream of an Axisymmetric Abrupt Expansions and in a Cavity of a Circular Tube", Reykjavik, Iceland, August 17-20, Proceeding of the 19th International Symposium on Transport Phenomena, ISTP19-139, 2008.
-국내학술회의 논문
1. 이대희, 김무근, "볼록한 반구면에 충돌하는 원형제트에 의한 열전달," 포항공과대학교, 1995년 4월 21-22일, 대한기계학회 1995년 춘계학술대회논문집, pp. 103-108, 1995.
2. 이대희, 정영석, 이승민. "볼록면에 충돌되는 원형제트에서 표면곡률이 정체점 열전달에 미치는 영향,"인하대학교, 1995년 11월 11일, 한국항공우주학회 1995년도 추계학술발표회논문집, pp 170-174.
3. 이대희, 정영석, 김대성. "난류원형제트가 충돌하는 볼록표면의 곡률이 열전달에 미치는 영향," 부산대학교, 1996년 4월18일, 대한기계학회 1996년 춘계학술대회논문집, pp. 494-500, 1996.
4. 김문경, 이영실, 김대성, 이대희, 윤순현, “경사진 평판에 충돌하는 2차원 제트의 대류 열전달 특성,” 대한기계학회 1996년 춘계학술대회논문집, pp. 488-493, 1996.
5. 정영석, 박성봉, 이대희, 부광석. "신경회로망을 이용한 새로운 액정의 교정 및 열전달계수 측정," 인하대학교, 1996년 11월 1-2일, 대한기계학회 1996년 추계학술대회논문집, pp. 503-507, 1996.
6. 김대성, 김진철, 이대희, 윤순현, “단이 진 경사벽면에 부착되는 2차원 평면제트의 열전달 효과에 관한 연구,” 대한기계학회 1996년 추계학술대회 논문집, pp. 457-462, 1996.
7. 이대희, 정영석, 이준식, “표면조도를 가지는 볼록한 면에 충돌하는 제트에 희한 열전달 계수 측정,” 대한기계학회 19997년 춘계학술대회논문집, pp. 609-614, 1997.
8. 이은현, 이대희, 이준식, “축대칭 충돌제트의 맥동이 평판열전달에 미치는 영향에 대한 실험적 연구,” 공기조화 냉동공학회 1997년 동계학술발표회논문집, pp. 521~525, 1997
9. 윤순현, 심재경, 이대희, “비정상후류가 선형터빈익렬의 유동 특성 및 익형의 열전달에 미치는 영향에 관한 연구,” 1998년 대한전기학회 추계학술대회논문집, pp. 713~716, 1998.
10. 이대희, 원세열, 이영민, 조헌노, 박성은, “원형 충돌제트의 노즐직경이 열전달에 미치는 영향," 대한기계학회 1998년도 열공학부문 추계학술대회논문집, pp. 71-75, 1998.
11. 이대희, 원세열, 이준식 “표면조도를 가지는 오목한 면에 충돌하는 원형제트에 의한 열전달 측정," 대한기계학회 1998년도 추계학술대회논문집, pp. 117-122, 1998.
12. 이대희, 원세열, 이영민, “Liquid Crystal을 이용한 열전달 측정방법,” 대한기계학회 1999년도 열공학부문 춘계학술대회논문집, pp. 22~31, 1999.
27. Lee,D.H., Lim, C.Y., Lee,D.K., Cha,Y.S., "Heat Transfer Enhancements in the Flow Channel with Helically Fluted Surfaces" 대한기계학회 2006년도 추계학술대회논문집, pp. 1680-1685, 2006.11.01, 무주리조트.
28. 이대희,이대근,차윤석,이준식, “전자모듈의 배열에 따른 열전달 특성의 실험적 연구,” 대한기계학회 2007년도 춘계학술대회논문집, pp. 2420-2425, 2007.05.30-06.01, 부산.
, researchField=
저공해ㆍ고효율 열병합 발전시스템 개발
저낙차 소수 코릭 발전시스템 개발
크랭크 없는 엔진 개발
고효율 열교환기 설계
자동차 디스크 브레이크 냉각기술 개발
충돌제트를 이용한 터빈블레이드 및 전자장비 냉각기술 개발
Data Acquisition System(데이터 획득장치) 개발
각종 열유체 측정 계기의 Calibration(보정) 기술
Color Image Processing System(칼라 영상처리 장치) 개발
, lectureField=
1. 학부개설교과목
Capstone Design Ⅰ,Ⅱ
2. 대학원개설교과목
열전달
일반수학
, thesis=
1. 공업수학Ⅰ('Advanced Engineering Mathematics' by O'Neil, 3rd edition) 이대희외 4인 공역, p 914, 1995년 2월 25일
2. O'Neil 저 공업수학Ⅱ('Advanced Engineering Mathematics' by O'Neil, 3rd edition) 이대희외 4인 공역, p 680, 1995년 2월 25일
3. O'Neil 저 공업수학 Ⅰ('Advanced Engineering Mathematics' by O'Neil, 4th edition) 이대희외 23인 공역, p 756, 1997년 2월 25일.
4. O'Neil 저 공업수학Ⅱ('Advanced Engineering Mathematics' by O'Neil, 4th edition) 이대희외 23인 공역, p 531, 1997년 2월 25일.
5. 원종하, 이대희, “대학행정 무엇이 문제인가,” 도서출판 선영사, p 249, 1999년 4월 10일
6. 김형만, 이대희, 강정길,, 선우남신, “공조시스템 성능해석 및 설계의 개요,” 인제대학교 현장특화 고급인력 공동양성센터, p 207, 2001년 4월 30일.
7. 쉽게 배우는 열전달 (“Introduction to Thermodynamics and Heat Transfer” by Yunus A. Cengel), 도서출판 인터비젼, 이대희 외 6인 공역, p 465, 2003년 8월 25일
8. 이대희, “열유체공학 이론 및 실험 (Theory and Experimentation in Thermo-Fluid Mechanics),” 진영문화사, p 197, 2004년 2월 1일.
9. 이대희, 박성봉, “자동차 열유체 계측 및 실습,” 출판기획 국민기획, p 264, 2006년 10월 18일.
, etc=
번역서:
1) O'Neil 저 공업수학 I, II, 1997년.
2. Cengel 저 알기쉬운 열전달, 맥그로힐에듀케이션코리아, 2016년
SCI 국제저널 논문:
1) “Investigation of impingement surface geometry effects on heat transfer in a laminar confined impinging slot jet,” International Journal of Heat and Mass Transfer, Vol. 115, pp. 347-353, 2017.12.
2) “Effects of hole shape on impingement jet array heat transfer with small-scale, target surface triangle roughness,” International Journal of Heat and Mass Transfer, Vol. 127, pp. 585-597, 2018.12.
3. "Fatigue analysis of automotive engine cover under vibration load", Beomkeun Kim, Heungseob Kim, Gyuchul Cho, Yongsu Kim, 2007(Sep) ICEM 2007
4. "Fatigue life analysis of automotive V-belt pulley", Beomkeun Kim, Yongsu Kim, Doo-man Chun, Sung-Hoon Ahn, Jae-Duk Jang, 2007(Aug) 14th Asia Pacific Automotive engineering conference,
5. "Stress analysis of automotive engine cover under static and vibration load", Beomkeun Kim, Heungseob Kim, Jaekwan Jeong, Kiweon kand, Gyuchul Cho, 2007 (Nov_ Key engineering, Vol 353-358, p2664-2667
6. "Effect of a fastener hole design of inlet flanges on the durability of the exhaustmanifold for a turbo-diesel engine", Beomkeun Kim, Seong Beom Lee, Eunhyun Lee, 2007(June) Proceedings of the institution of mechanical engineers part D- Journal of Automobile engineering, Vol. 221, p327-333 (SCI급)
7. "Mineral/glass reinforced polypropylene compound 재질 엔진 커버의 구조 및 동적 해석", 김범근, 김흥섭, 김용수, 조규철, 정재관 2007 (June) 한국복합재료학회지, Vol. 20, No.3, pp63-66 (국내학술지)
8. "Durability improvement of a cylinder head in consideration of manufacturing process", Beomkeun Kim, H. Chang, K. Lee, C. Kim, 2007 (April) IJAT, vol. 8, No.2, pp243-248 (SCIE급)
11. "자동차 엔진 커버의 구조 및 동적 해석", 김범근, 김흥섭, 조규철, 정재관, 2006 (October), 한국자동차공학회 경남지부 추계학술대회, pp53~57 (국내학술대회논문)
12. "Thermal deformation analysis of exhaust manifold for turbo diesel engine", Beomkeun Kim, Eunhyun Lee, Jong Sik Park, 2006 (September), Key Engineering Materials, Vols. 326~328, pp541~544 (SCI급)
13. "Fabrication of radar absorbing structure (RAS) using GFR-nano composite and springback compensation of hybrid composite RAS shells", Woo-kyun Jung, Beomkeun Kim, Myung-shik Won, Sung-Hoon Ahn, 2006 (September), Composite structures, Vol. 75, No1~4, pp571~576 (SCIE급)
15. "터보 디젤 엔진용 배기 매니폴드의 열변형 해석", 김범근, 이은현, 2006 (April), 한국자동차공학회 경남지부 춘계 학술 대회, pp21-26 (국내학술대회논문)
16. "Estimation of residual stress in cylinder head", Kim, B., Egner-walter, A., Chang, H., 2006 (February), International Journal of Automotive Technology , Vol. 7, No.1, pp69-74 (SCIE급)
17. "Finite element modeling and parameter study of half-bead of MLS cylinder head gasket",Cho, S.S., Han, B.K., Lee, J.H., Chang, H., and Kim, B, 2006 (February), International Journal of Automotive Technology , Vol. 7, No.1 , pp109-114 (SCIE급)
18. "Fabrication of Radar Absorbing Structure (RAS) Using GFR-Nano Composite and Spring-back Compensation of Hybrid-Composite RAS Shells", Jung, W.K., Won, M.S., Kim, B., Ahn, S. H., 2005 (Nov), ICCS, pp (국외학술대회논문)
19. "Fatigue Durability Assessment of Full-bead of MLS Gasket Using Finite Element Analysis, Han, B.K., Cho, S.S., Lee, J.H., Chang, H., and Kim, B, 2005 (October), Vol 6, No. 5, pp513-pp517 (SCIE급)
20. "Effects of forming process on sealing performance of full-bead of MLS gasket: Finite Element Analysis Approach ," Cho, S.S., Han, B.K., Chang, H., and Kim, B, 2005 (April), International Journal of Automotive TechnologyVol. 6, No. 2, pp191-pp196 (SCIE급)
21. " Improvement of Durability in HSDI Diesel Cylinder Head ," Kim, B., Chang, H., Lee, K. W., Kim, C. E, 2005 (April), SAE, pp384-pp389 (국외학술대회논문)
22. " 유한 요소 해석을 이용한 HSDI diesel cylinder head의 내구성 증대 ," 김범근, 장훈, 이경우, 김치언, 2004 (October), 한국자동차공학회 학술대회 논문집, pp384-pp389 (국내학술대회논문)
23. "A 샌드위치 구조물 내에서의 응용과 관련된 2차원 단위셀 형상을 지닌 심재에 대한 연구 ," 김범근, 2004 (October), 한국항공우주공학회 논문집, Vol. 32, No. 8, pp82-pp90 (국내논문)
24. " MLS 가스켓 완전 양각의 치수 및 성형공정과 피로수명의 관계 ," 조성산, 한병기, 이정현, 장훈, 김범근, 2004 (May), 한국자동차공학회 추계학술대회논문집, pp905-pp910 (국내학술대회논문집)
29. " 유한 요소법을 이용한 실린더 헤드/블록의 변형 및 응력해석 ," 김범근, 장훈, 2001 (May) 한국자동차공학회 학술강연논문집, pp105-pp111 (학술강연논문집)
30. " Basic two-dimensional core types for sandwich structures ," Kim, B, Christensen, R. M., 2000 (April), International Journal of Mechanical Sciences, Vol 42, No. 4, pp657-pp676 (SCI급)
31. " Effects of Processing Temperature and Layup on Springback ," Sarrazin, H, Kim, B, Ahn, S.H., and Springer, G.S., 1995 (July), Journal of Composite Materials, Vol 29, No. 10, pp1278-pp1294 (SCI급)
Tribo-coating contact mechanics, Friction and Wear
티타늄 합금의 파괴거동해석
브레이크 시스템 구조해석
Biomechanics of artificial joint, Total hip joint, Rotor Dynamics
, lectureField=
1. 학부개설교과목
Capstone Design Ⅰ,Ⅱ
기구학
정역학
, thesis=
1. Kim, B.S. and Moon, B.Y. and Mann, K.A. and Kim, H.S. and Boo, K.S. "simulated crack propagation in cemented total hip replacements," Journal of Materials Science & Engineering-A,Vol.483, PP.306~308, 2008.
2. Kim, B.S. and Song, J.H. and Kim, H.S. "Vehicle longitudinaland Lateral Stability Enhancement Using A tcs and Yaw motion controller," International Journal of Automotive Technology, 2007.
3. Kim, B.S. and Moon, B.Y. and Park, J.H. and Mann, K.A. " Biomechanical Analysis of Cemented Total Hip Replacements Using FEM," Journal of Mechanical Science and Technology(1738-494X), 2006
4. Kim, B.S. and Moon, B.Y. and Park, J.H. "Biomechanical Finite Element Analysis of bone Cemented Hip Crack Initiation According to Stem Design," KSME international journal, 2006.
5. Kim. B.S, "A comparison of statistical model to change of skin temperature," Journal of The Korean Data Analysis Society, 2006.
6. Kim, B.S. and Moon, B.Y. and Kang, H.K. and Chung, S.W. " Study for Evaluation of Surface Cracks on Tribological Coatings Failure in Contacting Systems,"Journal of Key Engineering Materials, 2006.
7.Kim, B.S. and Moon, B.Y. “Crack Face Friction Effects on Mode ∥ Stress Intensities for a Surface-Cracked Coating In Two-Dimensional Rolling Contact,” Journal of The Korean Society for Precision Engineering, 2005.
8. Kim, B.S. and Moon, B.Y. and Kim, K.H. "A study on Contact Deformation of Automotive Door Weatherstrip Using Non-Linear Finite Element Method,"Journal of The Korean Society of Automotive Engineers, 2005.
9. Kim, B.S. and Kim, H.S. and Choi, Y.and Hwang, H.J. and Kang, K.W. "The Thermal Analysis of Brake Disc with 3-D Coupled Analysis," Journal of Key Engineering Materials, 2005.
10. Kim, B.S. and Lee, C.T, and Kang, B.S. and Moon, B.Y. "Statistical random response analysis and reliability design of structure system with non-linearity," Journal of Mechanical Systems and Signal Processing, 2004.
11. J. of KSME, Vol.27, 12, pp.2019-2027, 2003
12. J. of Korean Ceramic Society, Vol.40, 3, pp.286-292, 2003
13. J. of KSNT, Vol.22, 5, pp.539-544, 2002
14. 김병수, 김위대, Hertzian 접촉하중시 TiN/Steel의 표면균열에 대한 모드 I 과 모드 II 응력확대계수, submitted to KSME, 2001
15. 김병수, 김위대, 부명환, 유한요소를 이용한 TiN/Steel 코팅재 표면균열의 파괴거동에 대한 해석, Proceedings of the KSME 2000 Spring Annual Meeting, pp. 1-8, 2000. 6
16. Mann, K.A., and Kim B.S., Influence of Stem Shape on Fatigue Fracture of the Cement Mantle in Femoral Hip Component, Transactions of Orthopaedic Research Society, Vol.25, pp.502, 2000. 3.
17. Kim, B.S. and Mann, K.A., A Thin Cement Mantle Decreases Fatigue Life of Cemented Femoral Hip Component, Transactions of Orthopaedic Research Society, Vol.24, pp.880, 1999. 2.
18. Eberhardt A.W. and Kim B.S., Effective Stress Intensities and Possible Mechanisms for a Surface Crack in Polyethylene Under Rolling and Sliding Contact,Transactions of Orthopaedic Research Society, Vol.24, pp.969, 1999. 2.
19. Eberhardt, A.W. and Kim, B.S., The Effect of Crack Length on Stress Intensities of Vertical Surface Cracks in Polyethylene Subject to Rolling and Sliding Contact, Transactions of the Orthopaedic Research Society, Vol.23, pp.810, 1998. 3.
20. Byeong S. Kim, Finite Element Analysis of Surface Cracks with Applications to Tribological Coatings and Polyethylene Wear, 박사학위논문, University of Alabama, Tuscaloosa, 1998. 5.
21. A.W.Eberhardt and B.S.KIM, "Stress Intensity Factors for a Vertical Surface Crack in Polyethylene Subject to Rolling and Sliding Contact," journal of Biomechanical Engineering ASEM Transactions, Vol.120,pp.778-783,1998.12.
22. B.S.KIM and A.W. Eberhardt,"First and Second Order Extrapolation for Model I and ModelII Edge Cracks,"Engineering Fracture Mechanicas,Vol.57,No.6,pp.715-720,1997.10
23. Alan W.Eberhardt Byeong S.Kim "Crack Face Friction Effects on Mode II Stress Intensities for a Surface Cracked Coating in Two-Dimensional Rolling Contact," Tribology Transactions Vol.41,1,pp.35-42,1998.1.
24. Alan W. Eberhardt, Byeong S. Kim, Hallie E. Placko, J.R. Tamarapalli, Jack L. Lemons, Fracture Mechanics of Polyethylene Pitting Wear in TKR: Pilot Finite Element Models, Proceedings of ASME Bioengineering Conference, BED Vol.35, pp.109-110, 1997. 6.
25. Alan W.Eberhardt Byeong S.Kim, E.Douglas Rigney, Gerald L. Kutner,and Charles R.Harte,"Effects of Procoating Surface Treatments on Fatigue of Ti-6AI-4V," Journal of Applied Biomaterials,6,pp.171-174,1995.10.