- 인하대학교 전자공학 공학사

- 인하대학교 전자공학 공학석사

- 인하대학교 전자공학 공학박사

- 1985 ~ 1987 : 한국데이타통신(주) (연구원)

- 1989 ~ 1990 : 명지대학교 시간강사 (시간강사)

- 1990 ~ 1993 : 인제대학교 전임강사 (전임강사)

- 1993 ~ 1999 : 인제대학교 (조교수)

- 1999 ~ 현재 : 인제대학교 (부교수)

- 2006 ~ 현재 : 한국산업기술평가원 기술개발기획평가단 (위원)

- 2012 ~ 2013 : University of Malaya (교수)

- 2015 ~ 현재 : Rutgers University, U.S.A (Visiting Scholar)

- 의료영상 신호처리 관련기술

- 생체전기계측과 영상처리

- 인공지능

- 재활 치료, 훈련 관련기술

- 디지털 시스템 및 마이크로컴퓨터 I/II, 프로그래밍 언어 II

- An Automatic Pulse Wave Velocity Estimation using a Blood Pressure Sensor for Invasive Measurement 2008/11/30

- Development of Gait Phase Analyzing Devices for the Gait Training Equipment for Hemiplegia Patients 2008/11/30

- 편마비 환자의 보행 자세 교정을 위한 보행 양상 검출 장치(II) 2008/11/07

- 마비 환자를 위한 하퇴 훈련 장치의 개발 2008/11/07

- A System Design of Gait Training Device for Monoplegia Patients 2008/08/20

- Design and Development of a Foot Position Tracking Device 2008/08/20

- An Efficient Gait Phase Detection Device Based on Magnetic Sensor Array 2008/06/25

- 재활 훈련중인 환자를 위한 다채널 무구속 심박동수 모니터링 시스템 2008/06/01

- Density estimation of Bemisia tabaci(Hemiptera: Aleyrodidae) in a greenhouse using sticky traps in conjunction with an image processing system 2008/04/02

- Automatic Identification of Tobacco Whiteflies, Aphids and Thrips in Greenhouse Using Image Processing Techniques 2008/01/25

- 미국 Cornell University,기계공학과 학사

- 미국 Cornell University,기계공학과 석사

- 미국 University of Iowa,의용공학과 박사

- 1994 ~ 1999 : 인제대학교 의용공학과 (조교수)

- 1999 ~ 2001 : 인제대학교 의생명대학 (부학장)

- 1999 ~ 2005 : 인제대학교 의용공학과 (부교수)

- 2005 ~ 현재 : 인제대학교 의용공학과 (교수)

- 2013 ~ 2015 : 한국정밀공학회 생체공학 부문 (부문회장)

- 2014 ~ 2015 : 대한생체역학회 (회장)

- 2017 ~ 2018 : 대한정형외과연구학회 (회장)

- 2018 ~ 2019 : 대한메디컬3D프린팅연구학회 (회장)

- Human body structure의 유한요소 모델링

- 유한요소 해석을 통한 외과/치과용 임플란트의 생체역학적 분석

- 기계적 실험을 통한 Implant의 안전성, 유효성 평가, 시험 수행

- 고령층 Comfort shoes 디자인 개발 및 생체역학적 분석

- 임상의학과 생체역학을 결합한 첨단 사업 분야에서의 연구

- 3D Printing 기반 임플란트의 생체역학적 분석 연구

- 3D 동작분석을 이용한 신체움직임에 대한 운동역학적 분석에 관한 연구

- 일반수학, 인간공학, 생체역학, 생체역학실험

- 고급생체역학 I/II, 척추생체역학 I/II

- Hui-sung Lee, Gun-So Kim, Sun-Hee Bang, Young-Woo Kwon and Sung-Jae Lee, “A study on Change of Mobility according to Rods and Transverse Connecting Device of Pedicle Screw System and Application of Performance Evaluation by Finite Element Analysis”, The Korean Society of Food, Drug and Cosmetics Regulatory Sciences, 2019

- Hui-sung Lee, Gun-So Kim, Sun-Hee Bang, Young-Woo Kwon and Sung-Jae Lee, “A study on the Application of finite element analysis for physical and mechanical characterization of pedicle screw system”, The Korean Society of Food, Drug and Cosmetics Regulatory Sciences, 2019

- Park, T. H., Woo, S. H., Lee, S. J., Sohn, D. M., Chung, C. K., Kim, Y. J., & Sohn, S, “Cross-link is a risk factor for rod fracture at pedicle subtraction osteotomy site: A finite element study”, Journal of Clinical Neuroscience, 2019.04

- Dae-Kyung Kwak, Won-Hyeon Kim , Sung-Jae Lee , Sang-Hyun Rhyu, Chul-Young Jang, and Je-Hyun Yoo, “Biomechanical Comparison of Three Different Intramedullary Nails for Fixation of Unstable Basicervical Intertrochanteric Fractures of the Proximal Femur: Experimental Studies”, Biomed Research International, Vol.2018, No.2018, P.1~9, 2018.12(SCIE)

- Wen-Ming Chen, Jie Jin, Taehyung Park, Kyeong-Sik Ryu, Sung-Jae Lee., “Strain behavior of malaligned cervical spine implanted with metal-on-polyethylene, metal-on-metal, and elastomeric artificial disc prostheses - A finite element analysis”, CLINICAL BIOMECHANICS, Vol.59, P.19~26, 2018.11(SCIE)

- Taejin Shin, Yongsik Kim, Jungsung Kim, Kwon-Yong Lee, Sung-Jae Lee, DooHoon Sun, Youngwook Lim, Dohyung Lim, “Applicability evaluation of direct metal tooling-based additive manufacturing for reducing ceramic liner fracture in total hip arthroplasty”, SURFACE & COATINGS TECHNOLOGY, Vol.347, P.313~319, 2018.08(SCIE)

- KwsnSu Kang, Young Woong Jang, Oui Sik Yoo, Dukyoung Jung, Sung-Jae Lee, Myung Chul Lee, Dohyung Lim, “Biomechanical Characteristics of Three Baseplate Rotational Arrangement Techniques in Total Knee Arthroplasty”, Biomed Research International, Vol.233, No.6, P.4070~4714, 2018.06(SCIE)

- Seil Sohn, Tae Hyun Park, Chun Kee Chung, Yongjung Jay Ki, Jong Wuk Jang,In-bo Han, Sung Jae Lee, “Biomechanical characterization of three iliac screw fixation techniques:A finite element study”, JOURNAL OF CLINICAL NEUROSCIENCE, Vol.2018, No.52, P.109~114, 2018.06(SCIE)

- Sung-Jae Park , Sung-Jae Lee , Wen-Ming Chen, Jung-Hong Park, Yong-Soo Cho,Taejin Shin, and Soon-Yong Kwon, “Computer-assisted optimization of the acetabular rotation in periacetabular osteotomy using patients anatomy-specific finite element analysis”, Applied Bionics and Biomechanics, Vol.2018, No.2018, P.1~11, 2018.02(SCIE)

- Lee, Joonho, Jeongyo Kim, Myoungjin Lee, Intak Chu, Sungjae Lee, and Heuichul Gwak., “Morton's Neuroma (Interdigital Neuralgia) Treated with Metatarsal Sliding Osteotomy”, Indian Journal of Orthopaedics, Vol.51, No.6, P.692~696, 2017.11

- 부산대학교 고분자공학과 학사

- The University of Iowa, Biomedical Engineering 석사

- The University of Iowa, Biomedical Engineering 박사

- 1996 ~ 1998 : Korea Institute Science and Technology (Senior Researcher)

- 1996 ~ 현재 : The Polymer Society of Korea (Member)

- 1996 ~ 현재 : The Korean Society for Biomaterials (Member)

- 1996 ~ 현재 : The Korea Society Medical and Biological Engineering (Member)

- 1998 ~ 1999 : Health Planing Evaluation Board (Chief Researcher)

- 2007 ~ 현재 : Korean Tissue Engineering & Regenerative Medicine Society (Member)

- 2017 ~ 현재 : Industrial Cooperation Group ICCE Inje Biomed (Director)

- 2015 ~ 2016 : Dept. Biomedical Engineering Vanderbilt University (Visiting Professor)

- 1999 ~ 현재 : Dept. Biomedical Engineering Inje University (Professor)

- Blue light 차단용 Contact Lens(material) 개발

- Poly(lactic-co-glycolic acid)를 응용한 조직공학용 Scaffold 개발

- Negative Poisson’s Ratio Polyurethane 지지체 개발

- Poly(lactic-co-glycolic acid)를 이용한 DDS(Drug Delivery System) 개발

- Hydrogel을 이용한 DDS(Drug Delivery System) 개발

- 의용재료의 생물학적 안정성 평가 (ISO-10993 기준)

- 의공화학, 인체생리학, 조직공학개론, 의료용 고분자 재료, 의용재료 실험, 임상분석화학, 의공통계

- 의공 유기화학, 생체조직공학 Ⅰ, 생체 조직공학 Ⅱ, 고분자 생체재료 Ⅰ, 고분자 생체재료 Ⅱ

- Shin JW, Wu Y, Kang YG, Kim JK, Choi HJ, Shin JW, “The Effects of Epigallocatechin-3-Gallate and Mechanical Stimulation on Osteogenic Differentiation of Human Mesenchymal Stem Cells: Individual or Synergistic Effects”, journal of TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 2017

- Wu YR, Choi HJ, Kang YG, Kim JK, Shin JW, “In vitro study on anti-inflammatory effects of epigallocatechin-3-gallate-loaded nano- and microscale particles”, journal of nanomedicine, 2017

- Myeong Jin Kim, Hong Jin Choi, Jongman Cho, Jung Bok Lee, Hak-Joon Sung, and Jeong Koo Kim, “MG-63 Cell Proliferation with Static or Dynamic Compressive Stimulation on an Auxetic PLGA Scaffold”, journal of Polymer Science, 2017

- Lee JB, Balikov DA, Yang JW, Kim KS, Park HK, Kim JK, Kwon IK, Bellan LM, Sung HJ, “Cationic Nanocylinders Promote Angiogenic Activities of Endothelial Cells”, journal of Polymers, 2016

- Hong Jin Choi, Jun Jae Lee, Yeong Jun Park, Jung-Woog Shin, Hak-Joon Sung, Ji Won Shin, Yanru Wu, and Jeong Koo Kim, “MG-63 osteoblast-like cell proliferation on auxetic PLGA scaffold with mechanical stimulation for bone tissue regeneration”, journal of Biomaterials Research, 2016

- Yeong Jun Park and Jeong Koo Kim, “The Effect of Negative Poisson’s Ratio Polyurethane Scaffolds for Articular Cartilage Tissue Engineering Applications”, journal of Advances in Materials Science and Engineering, 2011

- Tae Kyung Kim, Jeong Koo Kim, Ok Chan Jeong, “Measurement of nonlinear mechanical properties of PDMS elastomer”, journal of Microelectronic Engineering, 2011

- Bong Joo Park, Byoung Ju Kwon, Jae Kyeong Kang, Mi Hee Lee, Inho Han, Jeong Koo Kim, Jong-Chul Park, “Enhanced cellular responses of vascular endothelial cells on poly-γ-glutamic acid/PU composite film treated with microwave-induced plasma at atmospheric pressure”, journal of Macromolecular Research, 2011

- Hui Tak Kim, Jeong Koo Kim and Ok Chan Jeong, “Hydrophilicity of Surfactant-Added Poly(dimethylsiloxane) and Its Applications”, journal ofJapanese Journal of Applied Physics, 2011

- Inho Han, Barbora Vagaska, Dae Hyung Lee, Bong Joo Park, Seung-Woo Shin, Jeong Koo Kim, Seung Jin Lee, Jong-Chul Park, “Pre-wetting process with helium atmospheric pressure glow discharge for three-dimensional porous scaffold”, journal of Macromolecular Research, 2011

- 서울대학교 공과대학 기계공학과(학사)

- Georgia Institute of Technology, 기계공학과(석사, 박사)

- 부산대학교 의과대학 생리학교실(박사수료)

- 1993 ~ 현재 : 인제대학교 (교수)

- 1999 ~ 2000 : 미국 Duke 대학교 정형외과학 교실 (교환교수)

- 2018 ~ 현재 : (주)휴백셀 (기술고문)

- 2019 ~ 현재 : 대한의용생체공학회 (부회장)

- 줄기세포 증식, 분화 제어 및 관련 기기의 개발

- 조직공학

- 유한요소

- 임플란트(정형외과 및 치과)

- 공업수학, 재료역학 및 실험, 의용통계, 심혈관역학

- 생체시스템, 인공장기, 고급 고체역학, 실험기획법

- 김지은, 이은진, Wu Yanru, 강윤경, 신정욱(교신저자), “The combined effects of hierarchical scaffolds and mechanical stimuli on ex vivo expansion of haematopoietic stem/progenitor cells”, Artificial Cells Nanomedicine and Biotechnology, p586 ~ 593, 2019. 03

- Yanru Wu, Yun Gyeong Kang, Hana Cho, In Gul Kim, Eun-Jae Chung, Jung-Woog Shin(교신저자), “Combinational effects of mechanical forces and substrate surface characteristics on esophageal epithelial differentiation”, Journal of Biomedical Materials Research – Part A, p552~560, 2019. 03

- 김형규, 강윤경, 정승훈, 박남미, Jubert Marquez, 고경수, 이병두, 신정욱, 한진, “Cyclic stretch increases mitochondrial biogenesis in a cardiac cell line”, BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS, p768 ~ 774, 2018.11

- 강윤경, Jie Wei, 김지은, 우얀루, 이은진, Jiacan Su, 신정욱(교신저자), “Characterization and osteogenic evaluation of mesoporous magnesium-calcium silicate/polycaprolactone/polybutylene succinate composite scaffolds fabricated by rapid prototyping”, RSC Advances, p33882 ~ 33892, 2018.10

- Yun Gyeong Kang, Jee-Yeong Jeong, Tae-Hee Lee, Ho Sup Lee, Jung-Woog Shin(교신저자), “Synergistic integration of mesenchymal stem cells and hydrostatic pressure in the expansion and maintenance of human hematopoietic/progenitor cells”, Stem Cells International, p4527929 ~ 41, 2018. 02

- Yun Gyeong Kang, Jie Wei, Ji Won Shin, Yan Ru Wu, Jiacan Su, Young Shik Park, Jung-Woog Shin(교신저자), “Enhanced biocompatibility and osteogenic potential of mesoporous magnesium silicate/polycaprolactone/wheat protein composite scaffolds”, International Journal of Nanomedicine, p1107 ~ 1117, 2018. 01

- Sicheng Wang, Zhengrong Gu, Zhiwei Wang, Xiao Chen, Liehu Cao, Liang Cai, Quan Li, Jie Wei, Jung-Woog Shin & Jiacan Su(교신저자), “Influences of mesoporous magnesium calcium silicate on mineralization, degradability, cell responses, curcumin release from macro-mesoporous scaffolds of gliadin based biocomposites”, Scientific Reports, p174 ~ 174, 2018. 01

- Yan Ru Wu, Hong Jin Choi, Yun Gyeong Kang, Jeong Koo Kim, Jung-Woog Shin(교신저자), “In vitro study on anti-inflammatory effects of epigallocatechin-3-gallate-loaded nano- and microscale particles”, International Journal of Nanomedicine, p7007 ~ 7013, 2017. 09

- Yan Ru Wu, Yun Gyeong Kang, Ji Won Shin, Mi Jin Kim, Jung-Woog Shin(교신저자), “Mechanical Stimuli Modulate Intracellular Calcium Oscillations: A Pathological Model without Chemical Cues”, Biotechnology Letters, p1121 ~ 1127, 2017. 08

- Young Mi Kim, Yun Gyeong Kang, So Hee Park, Myung-Kwan Han, Jae Ho Kim, Ji Won Shin, Jung-Woog Shin(교신저자), “Effects of Mechanical Stimulation on the Reprogramming of Somatic Cells into into Human-induced Pluripotent Stem Cells”, Stem Cell Research & Therapy, 2017. 06 Human-induced Pluripotent Stem Cells”, Stem Cell Research & Therapy, 2017. 06

- 서강대학교 전자공학과 학사

- 서강대학교 전자공학과 석사

- 서강대학교 전자공학과 박사

- 2013 ~ 2013 : 서강대학교 (연구원)

- 2013 ~ 2015 : University of Southern California (Postdoctoral Research Associate)

- 2016 ~ 2016 : Georgia Institute of Technology (Postdoctoral Fellow)

- 2016 ~ 현재 : 인제대학교 (조교수)

- Medial Ultrasound/Photoacoustic Imaging and System

- HIFU (High Intensity Focused Ultrasound) / LIPUS (Low Intensity Pulsed Ultrasound)

- Micro Ultrasound Imaging System and Applications

- Acoustic Tweezers

- 의학물리, 의료기기 개론, 바이오 신호처리, 의료 영상 처리

- 초음파 공학 특론, 모바일 디바이스 기반의 의용 앱 설계

- H Yoon, KA Hallam, C. Yoon, and SY Emelianov, “Super-resolution imaging with ultrafast ultrasound imaging of optically triggered perfluorohexane nanodroplets,” IEEE Trans. Ultrason. Ferroelect. Freq. Contr., vol. 65, no. 12, pp. 2277-2285, 2018. 12

- J. H. Kim, S. Yeo, J. W. Kim, K. Kim, T.-K. Song, C. Yoon*, J. Sung, “Real-Time Lossless Compression Algorithm for Ultrasound Data Using BL Universal Code,” Sensors, vol. 18, no. 10, 3314, 2018.10

- H. Choi, C. Yoon*, S. Shin, “Development of a Novel Image Compression Algorithm for Point-of-Care Ultrasound Applications,” Journal of Medical Imaging and Health Informatics, vol. 8, no. 7, pp. 1526-1531, 2018. 09

- H. Jung, R. Wodnicki, H. G. Lim, C. W. Yoon, B. Kang, C. Yoon, C. Lee, J. Y. Hwang, H. H. Kim, H. Choi, M. S. Chen, Q. Zhou, K. Kirk Shung, “CMOS High Voltage Analog 1-64 Multiplexer/De-Multiplexer for Integrated Ultrasound Guided Breast Needle Biopsy,” IEEE Trans. Ultrason. Ferroelect. Freq. Contr., vol. 65, no. 8, pp. 1334-1345, 2018. 05

- H. G. Lim, H. H. Kim, and C. Yoon*, “Evaluation of acoustic trapping performance by tracking motion of trapped microparticle,” Japanese Journal of Applied Physics, vol. 57, no. 5, 057202, 2018. 04

- H. Yoon, K. Jeon, H. Lee, K. Kim, and C. Yoon*, “Effective adaptive dynamic quadrature demodulation for medical ultrasound imaging,” Journal of Electrical Engineering and Technology, vol. 13, no. 1, pp. 468-475, 2018. 01

- C. Yoon*, “Spectrum analysis for assessing red blood cell aggregation using high-frequency ultrasound array transducer,” Biomedical Engineering Letters, vol. 7, no. 4, pp. 273-279, 2017.11.

- H. Choi, J. Ryu, and C. Yoon*, “Development of novel adjustable focus head mount display for concurrent image-guided treatment applications,” Computer Assisted Surgery, vol. 22, no. s1, pp. 163-169, 2017. 10

- H. Yoon, S. K. Yarmoska, A. S. Hannah, C. Yoon, K. A. Hallam, and S. Y. Emelianov, “Contrast-enhanced ultrasound imaging in vivo with laser-activated nanodroplets,” Med. Phys., vol. 44, no. 7, pp. 3444-3449, 2017. 07

- C. Yoon, B. J. Kang, H. Kim, and K. Kirk Shung, “Development of a low complexity, cost effective digital beamformer architecture for high-frequency ultrasound imaging,” IEEE Trans. Ultrason. Ferroelect. Freq. Contr., vol. 64, no. 6, pp. 1002-1008, 2017. 06

- 서강대학교 전자공학 학사

- 한국과학기술원 전기 및 전자공학 석사

- 한국과학기술원 전기 및 전자공학 박사

- 1987 ~ 1988 : 미국 Columbia 대학교 의과대학/방사선과 (연구원)

- 1991 ~ 1995 : 서울중앙병원 아산생명과학연구소 방사선의학연구실 (선임연구원)

- 1996 ~ 1999 : 삼성종합기술원 의료기기연구실 (전문연구원)

- 2003 ~ 2004 : 인제대학교 의료영상과학 (주임)

- 2005 ~ 2006 : 미국 Emory Univ (교수)

- 2006 ~ 2008 : 인제대학교 대학원 (부원장)

- 2008 ~ 2010 : 인제대학교 의료영상과학 (주임)

- 2009 ~ 2011 : 인제대학교 의용공학과 (학과장)

- 2019 ~ 2020 : 인제대학교 의용공학과 (학과장)

- Magnetic Resonance Imaging(MRI) System (자기공명영상시스템)

  Pulse sequence algorithm

  Flow imaging / Angiography / Perfusion

  RF system / Gradient system

  Image reconstruction algorithm

- Signal processing

- Imaging Processing

- Positron emission tomography(PET) system

- Medical Imaging System

- 생체신호 및 시스템, 생체계측

- 의용계측 특론, 생체신호처리, 의료영상시스템, 자기공명영상시스템

- Y.H. Han, C.W. Mun. “Evaluation of the keyhole technique applied to the proton resonance frequency method for magnetic resonance temperature imaging”, JMRI, Vol.34, p1231~1239, 2011

- K.S. Kim, H.H. Choi, C.S. Moon, C.W.Mun. "Comparison of k-nearest neighbor, quadratic discriminant and linear discriminant analysis in classification of electromyogram signals based on the wrist-motion directions", Current Applied Physics, Vol11, p740~745, 2011

- 문치웅 외 3명 “생물활성정보수가 종양 유래 동물세포 성장에 미치는 영향에 관한 고찰”, 의공학회지, Vol.32, p185~190, 2011

- 문치웅 외 2명 “금 나노 입자의 형태적 특성에 따른 T_1, T_2 이완 시간의 변화 측정”, 대한자기공명의과학회지, Vol.15, p48~56, 2011

- D.H. Kim, S.J. Heo, J.W. Shin, C.W. Mun, K.M. Park, K.D. Park, K.S. Jee. "Preparation of thermosensitive gelatin-pluronic copolymer for cartilage tissue engineering", Macromolecular research, Vol.18, p387~391, 2010

- Cho. S, Lee. H, Moon. C, Kim. J, Park. J, Jeon. G, Lee. R, Nam. S. "Synthesis and characterization of Eu3+ doped Lu2O3 nanophosphor using a solution-combustion method", Journal of sol-gel science and technology, Vol.53, p171~175, 2010

- 문치웅 외 6명 “다채널 근전도 신호를 이용한 체감형 게임 인터페이스 개발", 한국게임학회 논문지, Vol.10, p65~73, 2010

- 문치웅 외 2명, "뇌 대사물질 팬텀을 이용한 뇌의 자기공명 온도측정법에 관한 기초 연구", 의공학회지, Vol.31, p412~416, 2010

- 문치웅 외 3명, “근전도 바이오피드백을 이용한 근상태 평가 및 응용”, 한국전기전자재료학회, Vol.23, p33~40, 2010

- Preparation of Thermosensitive Gelatin-Pluronic Copolymer for Cartilage Tissue Engineering, Kim.DH, Heo.SJ, Shin.JW, Mun.CW, Park.KM, Park.KD, Jee.KS, MACROMOLECULAR RESEARCH, Vol.18, p.387-391, 2010

- (박사) 인제대학교 의용공학과

- (석사) 인제대학교 융합의과학

- (학사) 인제대학교 의용공학과

- 2018.03 ~ 2020.12 : 인제대학교(외래교수 및 연구원)

- 2019.03 ~ 2020.12 : 한성대학교(연구원)

- 2021.01 ~ 2025.02 : 인제대학교(연구교수)

- 2025.03 ~ 2025.08 : 인제대학교(강사)

- 2025.09 ~ 현재 : 인제대학교(조교수)

- 재료역학, 재료물성, 공업수학, 프로그래밍언어 Ⅰ, 물리화학, 생체역학, 의료용 고분자 화학

- 고분자생체재료 Ⅰ, 고분자 생체재료 Ⅱ, 생체재료과학

- Rajesh Madhuvilakku, Hong Jin Choi, Ok Chan Jeong, Yonggeun Hong. (2025). Nanozyme film with dicopper-coordinated amino-ligands: A dual enzyme-mimic for real-time in situ dopamine sensing in human neuroblastoma cells. Biosensors and Bioelectronics, 278, 117375.

- Choi, H. J., Khan, Z. A., Ansari, A., Choi, J., Kim, E. J., Han, S. H., ... & Hong, Y. (2025). Comparison of Wound Healing Effects of Different Micro-Patterned Hydrogels on the Skin of Secondary Intention Rat Model. Gels, 11(4), 239.

- Sumsuzzman, D. M., Khan, Z. A., Jung, J. H., Hong, Y., Yang, W. J., Park, K., ... & Hong, Y. (2024). Comparative Efficacy of Glucosamine-Based Combination Therapies in Alleviating Knee Osteoarthritis Pain: A Systematic Review and Network Meta-Analysis. Journal of Clinical Medicine, 13(23), 7444.

- Choi, H. J., Ahn, G., Yu, U. S., Kim, E. J., Ahn, J. Y., & Chan Jeong, O. (2023). Pneumatically driven microfluidic platform and fully automated particle concentration system for the capture and enrichment of pathogens. ACS omega, 8(31), 28344-28354.

- Choi, H. J., Kim, B. W., Lee, S., & Jeong, O. C. (2022). Microfluidic Acoustophoresis for Flowthrough Separation of Gram-Negative Bacteria using Aptamer Affinity Beads. Journal of Visualized Experiments (JoVE), (188), e63300.

- Choi, H. J., Lee, J. H., & Jeong, O. C. (2022). Pneumatically driven microfluidic platform for micro-particle concentration. Journal of Visualized Experiments (JoVE), (180), e63301.

- Park, S., Lee, S., Kim, H. S., Choi, H. J., Jeong, O. C., Lin, R., ... & Lee, M. H. (2022). Square microchannel enables to focus and orient ellipsoidal Euglena gracilis cells by two-dimensional acoustic standing wave. Microchimica Acta, 189(9), 331.

- Song, D. G., Lee, J., Choi, H. J., & Kim, J. K. (2022). Study on contact lens that blocks blue light from LED. POLYMER-KOREA, 46(1), 62-67.

- Choi, H. J., Lee, J., & Kim, J. K. (2020). Production and characterization of poly lactic-co-glycolic acid particles containing anti-inflammatory substances for skin lesion recovery. Journal of Bioactive and Compatible Polymers, 35(4-5), 414-425.

- Choi, H. J., Jang, H. S., Lee, J., Cho, J., & Kim, J. K. (2020). PLGA/Hydroxyapatite/beta-TCP Composite Scaffold Possessing Negative Poisson's Ratio for Bone Regeneration. POLYMER-KOREA, 44(5), 684-688.

- Wu, Y. R., Choi, H. J., Kang, Y. G., Kim, J. K., & Shin, J. W. (2017). In vitro study on anti-inflammatory effects of epigallocatechin-3-gallate-loaded nano-and microscale particles. International journal of nanomedicine, 7007-7013.

- Kim, M. J., Choi, H. J., Cho, J., Lee, J. B., Sung, H. J., & Kim, J. K. (2017). MG‐63 Cell Proliferation with Static or Dynamic Compressive Stimulation on an Auxetic PLGA Scaffold. International Journal of Polymer Science, 2017(1), 1286109.

- Choi, H. J., Lee, J. J., Park, Y. J., Shin, J. W., Sung, H. J., Shin, J. W., ... & Kim, J. K. (2016). MG-63 osteoblast-like cell proliferation on auxetic PLGA scaffold with mechanical stimulation for bone tissue regeneration. Biomaterials research, 20(1), 33.

- Choi, H. J., Lee, J. J., Lee, J. B., Sung, H. J., Shin, J. W., Shin, J. W., ... & Kim, J. K. (2016). MG-63 cells proliferation following various types of mechanical stimulation on cells by auxetic hybrid scaffolds. Biomaterials research, 20(1), 32.

- 인하대학교 전자공학 공학사

- 인하대학교 전자공학 공학석사

- 인하대학교 전자공학 공학박사

- 1989 ~ 현재 : 인제대학교 (교수)

- 1993 ~ 1994 : 일본 동경대학 (교환교수)

- 1997 ~ 1999 : 인제대학교 보건대학 (학장)

- 1998 ~ 2005 : 대한의용생체공학회 (이사)

- 2002 ~ 현재 : 한국 재활복지공학회 (이사)

- 2006 ~ 현재 : 한국산업기술평가원 기술개발기획평가단 (위원)

- 2011 ~ 현재 : 보건복지부 의료기기위원회 (위원)

- 2011 ~ 현재 : 해군의무장비위원회 (고문)

- 2015 ~ 2017 : 국방부의무자문관 (자문관)

- 2015 ~ 2017 : 의료기기위원회 (위원)

- 2016 ~ 2016 : 의료기기 이상사례 심의위원회 (심의위원)

- 2016 ~ 2017 : 식약처 차세대의료기기 100 프로젝트 (전문가위원)

- 2016 ~ 2018 : 식품의약품안전평가원 (임상전문위원)

- 초음파 신호처리 및 2/3차원 영상처리

- 의료용 초음파 시스템 및 변환기 개발

- 의료용 초음파의 생물학적 효과

- 초음파 기기 성능/안전성 평가 가이드라인 연구

- HIFU(High Intensity Focused Ultrasound)

- LIPUS(Low Intensity Pulsed Ultrasound)

- UCA(Ultrasound Contrast Agent)의 활용

- 기초전자공학, 기초전자공학실험, 전자회로, 전자회로실험

- 의용초음파, 초음파계측, 의용초음파 특론, 의용초음파 응용

- 최흥호 "하지정맥류 모사 생체조직 팬텀과 조직등가 팬텀을 이용한 초음파 치료효과 평가에 관한 연구", 한국방사선학회지, 2018.06

- 최흥호 "Thermal Characteristics of Non-biological Vessel Phantoms for Treatment of Varicose Veins using High-Intensity Focused Ultrasound", 한국방사선학회지, 2018.06

- 최흥호 "Thermal Characteristics of Non-biological Vessel Phantoms for Treatment of Varicose Veins using High-Intensity Focused Ultrasound", PLOS ONE, 2017.04.06

- 강정훈, 최흥호 “근전도 바이오피드백을 이용한 근상태 평가 및 응용”, 전기전자재료학회지 pp.33-40, 2010.10

- 강정훈, 최흥호 “다채널 근전도 신호를 이용한 체감형 게임 인터페이스 개발”, 게임학회지 pp.65-74, 2010.10

- S. J. Yoon, S. C. Noh, H. H. Choi “Thermographic diagnosis system and imaging algorithm by distributed thermal data using single infrared sensor”, Current Applied Physics pp.487-497 , 2010.03

- 유우진, 노시철, 정동환, 박재현, 최흥호 “초음파 치료의 효율성 향상을 위한 초음파 온열 시뮬레이터 개발”, 대한의용생체공학회지 pp.418-427, 2009.12

- 박문규, 노시철, 박재현, 최흥호 “전립선암의 온열치료를 위한 초음파 변환기 개발에 관한 연구”, 한국센서학회지 pp.377-384, 2009.11

- 노시철, 강규홍, 이정석, 민권식, 권장우, 최흥호. “환자 맞춤형 전자기장 요실금 치료 시스템 개발“, 전자공학회논문지, p51~59, 2008.07.31

- 박재현, 장화선, 정재우, 노시철, 최흥호. “보행시 족저압 분포와 척추측만의 상관관계 연구”, 센서학회지, p210~216, 2008.04.02

- 아주대학교 전자공학부 제어계측공학 학사

- 아주대학교 전자공학부 제어계측공학 석사

- 아주대학교 전자공학부 제어계측공학 박사

- 1991 ~ 2004 : 아주대 전자공학부 제어계측공학전공 (석사/박사)

- 2004 ~ 2007 : 일본 입명관대학 COE(Center of Excellence) (박사 후 연구원)

- 2007 ~ 2008 : 부산 테크노파크 MEMS/NANO 부품생산센터 (겸임부장)

- 2007 ~ 현재 : 인제대학교 의공학부 (교수)

- 2017 ~ 현재 : 대한전기학회 (이사)

- 2018 ~ 현재 : 인제대학교 산학협력단/기술이전센터 (부단장/센터장)

- BIO & Medical MEMS(Micro – Electro – Mechanical Systems)

- Micro sensors and actuators

- Micro fluidic systems

- Micro Surgical Robot System

- Multi-Physics in Micro System

- 회로이론, 생체시스템공학, 바이오멤스 개론, 미세소자 제작 실습

- 마이크로나노 소자 개론, 다중물리해석, 제어이론

- O. C. Jeong and S. Konishi, "Three-Dimensionally Combined Carbonized Polymer Sensor and Heater", Sensors and Actuators A. in press, 2007 (1.434)

- O. C. Jeong and S. Konishi, "Pneumatic Gas Regulator with Cascaded PDMS Seal Valves", Sensors and Actuators A. in press, 2007 (1.434)

- O. C. Jeong and S. Konishi, "Fabrication and Drive Test of All PDMS Pneumatic Micro Pump", Sensors and Actuators A. Vol. 3, Issue 2, pp. 849-856, 2007 (1.434)

- O. C. Jeong and S. Konishi, "All PDMS Pneumatic Micro Finger with Bidirectional Motion and Its Application", IEEE/ASME J. MEMS, Vol. 15, No. 4, pp. 896-903, Aug. 2006. (3.005)

- O. C. Jeong, S. W. Park, S. S. Yang, and J. H. Pak, "Fabrication of a Peristaltic PDMS micropump", Sensors and Actuators A, A 123-124 , pp. 453-458, Sept. 2005 (1.434)

- K. Naka, H. Nagae, M. Ichiyanagi, O. C. Jeong, and S. Konishi, "Investigation of Pyrolyzed Polyimide Thin Film as MEMS Material", Journal of Semiconductor Technology and Science, Vol.5, No.1, pp. 38-44, March 2005. (0)

- O. C. Jeong, S. W. Park, and S. S. Yang, "Fabrication and Drive Test of a Peristaltic Thermopnuematic PDMS Micropump", KSME International Journal, Vol. 19, No. 2, pp. 649-654, Feb. 2005. (0.344)

- O. C. Jeong and S. S. Yang, "Correlation between the Residual Stress and the Boron Concentration in Boron-doped Silicon Films", Japanese Journal of Applied Physics, Pt1, Vol. 44, No. 1A, pp. 350-357, Jan. 2005.

- K. H. Kim, H. J. Yoon, O. C. Jeong, and S. S. Yang, "Fabrication and Test of a Micro Electromagnetic Actuator", Sensors and Actuators A, Vol. 117, Issue 1, pp. 8-16, Jan. 2005. (1.434)

- 서울대학교 응용생물화학부 학사

- 광주과학기술원 생명과학과 석사

- 한국과학기술원 생명화학공학과 박사

- 2007 ~ 2008 : 한국과학기술원 (연수연구원)

- 2008 ~ 2010 : University of California, Santa Barbara (Postdoctoral Scholar)

- 2010 ~ 2011 : University of California, Berkeley (Postdoctoral Scholar)

- 2011 ~ 2011 : 한국과학기술원 (연수연구원)

- 2011 ~ 2012 : 한국과학기술원 (연구조교수)

- 2012 ~ 2016 : 울산과학기술원 (연구조교수)

- 2016 ~ 현재 : 인제대학교 (조교수)

- 2018 ~ 현재 : 한국생물공학회 (평의원)

- 질병의 진단과 치료를 위한 탄소양자점의 개발

- 그래핀 옥사이드를 이용한 진단용 바이오센서 개발

- 폴리디아세틸렌을 이용한 체외 진단 센서 개발

- 표적 물질 검출을 위한 마이크로 어레이 개발

- 의공생화학 I, 의공생화학 II, 의공학기술을 이용한 최신 진단기술, 나노바이오 진단기술

- 의공바이오소재분리공학, 이미지 기반 진단치료학

- Yongchao Ma, Pesi Mwitumwa Hangoma, Woon Ik Park, Jae-Hong Lim, Yun Kyung Jung, Jung Hyun Jeong, Sung Heum Park,* Kwang Ho Kim,* “Controlled crystal facet of MAPbl3 perovskite for highly efficient and stable solarcell via nucleation modulation”, Nanoscale, 2019

- Woon Ik Park,+,* Yun Kyung Jung,+ YongJoo Kim, Weon Ho Shin, Young Joong Choi, Tae Wan Park, Jung Ho Shin, Young Hun Jeong, Jung Ho Cho, Hyo-Soon Shin, Se-Hun Kwon, Yeon Sik Jung,* Kwang Ho Kim,* “Individual Confinement of Block Copolymer Microdomains in Nanoscale Crossbar Templates”, Advanced Functional Materials, 2018

- Vellaiappillai Tamilavan, Insoo Shin, Rajalingam Agneeswari, Yanliang Liu, Yun Kyung Jung, Bo Ram Lee, Youngeup Jin, Jung Hyun Jeong, Myung Ho Hyun, Sung Heum Park,* “Effects of inserting keto-functionalized side-chains instead of imide-functionalized side-chain on the pyrrole backbone of 2,5-bis(2-thienyl) pyrrole-based polymers for organic solar cells”, Journal of Photochemistry & Photobiology, A: Chemistry, 2019

- Vellaiappillai Tamilavan, Yanliang Liu, Insoo Shin, Jihoon Lee, Jung Hyun Jeong, Yun Kyung Jung,* Sung Heum Park,* “Effects of replacing benzodithiophene with a benzothiadiazole derivative on an efficient wide band-gap benzodithiophene-alt-pyrrolo[3,4-c]pyrrole-1,3(2H,5H)-dione copolymer”, Journal of Photochemistry & Photobiology, A: Chemistry, 2019

- Yun Kyung Jung, Hyun Gyu Park,* “Colorimetric polydiacetylene (PDA) liposome-based assay for rapid and simple detection of GST-fusion protein”, Sensors and Actuators B: Chemical, 2019

- Yanliang Liu, Insoo Shin, Yongchao Ma, In-Wook Hwang, Yun Kyung Jung, Jae Won Jang, Jung Hyun Jeong, Sung Heum Park,* Kwang Ho Kim, “Bulk heterojunction-assisted grain growth for controllable and highly crystalline perovskite films”, ACS Applied Materials & Interfaces, 2018

- Vellaiappillai Tamilavan, Jihoon Lee, Rajalingam Agneeswari, Yun Kyung Jung, Youngeup Jin, Jung Hyun Jeong, Myung Ho Hyun, Sung Heum Park,* “Thiophene and thieno[3,2-b]thiophene π-bridged pyrrolo[3,4-c]pyrrole-1,3-dione-based wide band-gap polymers for fullerene and non-fullerene organic solar cells”, Organic Electronics, 2018

- Vellaiappillai Tamilavan, Jihoon Lee, Dal Yong Lee, Rajalingam Agneeswari, Yun Kyung Jung, Youngeup Jin, Jung Hyun Jeong, Myung Ho Hyun, Sung Heum Park,* “Pyrrole N-alkyl side chain effects on the properties of pyrrolo[3,4-c]pyrrole-1,3-dione-based polymers for polymer solar cells”, New Journal of Chemistry, 2018

- Yongchao Ma, Jihoon Lee, Yanliang Liu, Pesi Mwitumwa Hangoma, Woon Ik Park, Jae-Hong Lim, Yun Kyung Jung, Jung Hyun Jeong, Sung Heum Park,* Kwangho Kim,* “Synchronized-pressing fabrication of cost-efficient crystalline perovskite solar cells via intermediate engineering”, Nanoscale, 2018

- Vellaiappillai Tamilavan, Yanliang Liu, Jihoon Lee, Yun Kyung Jung, Semo Son, Junghyun Jeong, Sung Heum Park,* “Highly crystalline new benzodithiophene–benzothiadiazole copolymer for efficient ternary polymer solar cells with an energy conversion efficiency of over 10%”, Journal of Materials Chemistry C, 2018